ContiTech AGAT5 260 GEN III
Specifications
Identification on the belt : MADE IN GERMANYSYNCHROFLEX AT5/260 GENIII
Trademark : CONTI®SYNCHROFLEX
Manufacturer : ContiTechAG (Германия)
Belt dimensions:
Tooth step | t | мм | 5 |
Thickness | hs | мм | 2.7 |
Tooth height | ht | мм | 1.2 |
Nominal length | Lp/Lw | мм | 260 |
Number of teeth |
52 | ||
Width | bo | мм | 10 |
Length (inch) | h | мм | 260 |
SALNIK REINFORCED (TC)
Manufacturer: NQK SF
Sizes: 33x50x6 (mm)
SALNIK REINFORCED (TC)
Manufacturer: NQK SF
Sizes: 25x44.6x6 (mm)
RPP14 DD 2376 MFX - Megaflex
Manufacturer: ContiTech AG
O-RING
Manufacturer: NQK SF
Sizes: 133.80x140.00x3.10 (mm)
HTD 950 5M
Manufacturer: ContiTech AG
K21 PU(12x22x7)
Manufacturer: KASTAS
Sizes: 12x22x7 (mm)
ZX 45 ZX 1165 Ld
Manufacturer: ContiTech AG
K21 PU(6x13x5,5)
Manufacturer: KASTAS
Sizes: 6x13x5,5 (mm)
SEALS (REINFORCED SEAL) (AS)
Manufacturer: FEKO
Sizes: 125x145x13 (mm)
3.53 NBR 70(059,92x03,53)
Manufacturer: KASTAS
INSTALLING BEARINGS
Approximately 16% of all early pill accidents are caused by faulty mounting (generally excessive force) and lack of proper tools.
DROPPING BEARINGS
The need for dismantling (removal) of the bearing can be caused by several reasons: failure of the bearings, disassembly of other parts of the mechanism, and so on.
SELECTION OF FUEL OILS
The use of grease to lubricate the bearings ensures smooth operation and maximum reliability of bearings, even in extreme conditions.