ContiTech AGAT3/1011 GEN III ( АТ3 1011 GENIII )
Specifications
Identification on the belt : MADE IN GERMANYSYNCHROFLEX AT3/1011 GENIII
Trademark : CONTI® SYNCHROFLEX
Manufacturer : CONTITECH (Германия)
Belt dimensions:
| Tooth step | t | мм | 3 |
| Thickness | hs | мм | 1.9 |
| Tooth height | ht | мм | 1.1 |
| Nominal length | Lp/Lw | мм | 1011 |
| Number of teeth |
337 | ||
| Minimum pulley diameter | dw | мм | 15 |
| Width | bo | мм | 10 |
| Length (inch) | h | мм | 1011 |
Manufacturer: ContiTech AG
HTD 416 8M CXA
Manufacturer: ContiTech AG
Подшипник NU 232 E
Manufacturer: NACHI
Sizes: 160x290x48 (mm)
Weight:: 15.6 (kg)
SEALS (REINFORCED SEAL) (BTS)
Manufacturer: FEKO
Sizes: 80.17x113.05x12/20.50 (mm)
GEAR PULLEYS 8M-34S 84.98 (8M-34S 84.98/21)
Manufacturer: BBC
ПОДШИПНИК РОЛИКОВЫЙ РАДИАЛЬНЫЙ NU1011-E-M1
Manufacturer: FAG
Sizes: 55x90x18 (mm)
ПОДШИПНИК ШАРИКОВЫЙ РАДИАЛЬНО-СФЕРИЧЕСКИЙ 1219-K-M-C3
Manufacturer: FAG
Sizes: 95x170x32 (mm)
Weight:: 225 (kg)
ПОДШИПНИК ШАРИКОВЫЙ РАДИАЛЬНЫЙ 61903-2RSR
Manufacturer: FAG
Sizes: 17x30x7 (mm)
HTD 8M 1336 ( HTD8M 1336 -V, -M, -MFX )
Manufacturer: ContiTech AG
STUFFING BOX (REINFORCED CUFFS) NON-STANDARD (TCL)
Manufacturer: STO
Sizes: 79x99x9 (mm)
INSTALLING BEARINGS
Approximately 16% of all early pill accidents are caused by faulty mounting (generally excessive force) and lack of proper tools.
DROPPING BEARINGS
The need for dismantling (removal) of the bearing can be caused by several reasons: failure of the bearings, disassembly of other parts of the mechanism, and so on.
SELECTION OF FUEL OILS
The use of grease to lubricate the bearings ensures smooth operation and maximum reliability of bearings, even in extreme conditions.
