ContiTech AGAT3/1011 GEN III ( АТ3 1011 GENIII )
Specifications
Identification on the belt : MADE IN GERMANYSYNCHROFLEX AT3/1011 GENIII
Trademark : CONTI® SYNCHROFLEX
Manufacturer : CONTITECH (Германия)
Belt dimensions:
Tooth step | t | мм | 3 |
Thickness | hs | мм | 1.9 |
Tooth height | ht | мм | 1.1 |
Nominal length | Lp/Lw | мм | 1011 |
Number of teeth |
337 | ||
Minimum pulley diameter | dw | мм | 15 |
Width | bo | мм | 10 |
Length (inch) | h | мм | 1011 |
SALNIK REINFORCED (TC)
Manufacturer: NQK SF
Sizes: 105x138x12 (mm)

SEALS (REINFORCED SEAL) (FL)
Manufacturer: FEKO
Sizes: 57.15x76.23x19.40 (mm)

Bearing 7312ACZ1 (46312Z1)
Manufacturer: TMB
Sizes: 60x130x31 (mm)
Weight:: 1.75 (kg)

ШАРИКОПОДШИПНИК РАДИАЛЬНО-УПОРНЫЙ С ЧЕТЫРЕХТОЧЕЧНЫМ КОНТАКТОМ QJ330-N2-MPA
Manufacturer: FAG
Sizes: 150x320x65 (mm)

Krestovina 44x129
Manufacturer: TOYO

MEGADYNE ISORAN 318 RPP3 ( RPP 3M 318 )
Manufacturer: ContiTech AG

RPP8 7168 ( RPP 8 7168 -V, -M, -MFX )
Manufacturer: ContiTech AG

Bearing FC66961
Manufacturer: INA-FAG
Sizes: 25.450x39.420x0.810 (mm)
Weight:: 0.004 (kg)

AT5 390 GEN III
Manufacturer: ContiTech AG

HTD 8M 3872 ( HTD8M 3872 -V, -M, -MFX )
Manufacturer: ContiTech AG


INSTALLING BEARINGS
Approximately 16% of all early pill accidents are caused by faulty mounting (generally excessive force) and lack of proper tools.

DROPPING BEARINGS
The need for dismantling (removal) of the bearing can be caused by several reasons: failure of the bearings, disassembly of other parts of the mechanism, and so on.

SELECTION OF FUEL OILS
The use of grease to lubricate the bearings ensures smooth operation and maximum reliability of bearings, even in extreme conditions.