ContiTech AGAT3/816 GEN III ( АТ3 816 GENIII )
Specifications
Identification on the belt : MADE IN GERMANYSYNCHROFLEX AT3/816 GENIII
Trademark : CONTI® SYNCHROFLEX
Manufacturer : CONTITECH (Германия)
Belt dimensions:
| Tooth step | t | мм | 3 |
| Thickness | hs | мм | 1.9 |
| Tooth height | ht | мм | 1.1 |
| Nominal length | Lp/Lw | мм | 816 |
| Number of teeth |
272 | ||
| Minimum pulley diameter | dw | мм | 15 |
| Width | bo | мм | 10 |
| Length (inch) | h | мм | 816 |
Подшипник 23268CAE4
Manufacturer: NSK-RHP
Sizes: 340x620x224 (mm)
Weight:: 295 (kg)
SEALS (REINFORCED SEAL) (ARS)
Manufacturer: FEKO
Sizes: 90x110x15 (mm)
Корпус UCPK326
Manufacturer: NACHI
Weight:: 81.6 (kg)
Bearing NJ2205E (42505E)
Manufacturer: TMB
Sizes: 25x52x18 (mm)
Weight:: 0.17 (kg)
K21 PU(30x40x10)
Manufacturer: KASTAS
Sizes: 30x40x10 (mm)
Торцевое уплотнение RM Z1-20
Manufacturer: RiMi
ПОДШИПНИК РОЛИКОВЫЙ САМОУСТАНАВЛИВАЮЩИЙСЯ 22319-E1-K
Manufacturer: FAG
Sizes: 95x200x67 (mm)
K06 NBR(230x250x18/10)
Manufacturer: KASTAS
Sizes: 230x250x18/10 (mm)
HTD 753 3M
Manufacturer: ContiTech AG
Подшипник 23092EK
Manufacturer: NACHI
Sizes: 460x680x163 (mm)
Weight:: 208 (kg)
INSTALLING BEARINGS
Approximately 16% of all early pill accidents are caused by faulty mounting (generally excessive force) and lack of proper tools.
DROPPING BEARINGS
The need for dismantling (removal) of the bearing can be caused by several reasons: failure of the bearings, disassembly of other parts of the mechanism, and so on.
SELECTION OF FUEL OILS
The use of grease to lubricate the bearings ensures smooth operation and maximum reliability of bearings, even in extreme conditions.
