ContiTech AGAT3/648 GEN III ( АТ3 648 GENIII )
Specifications
Identification on the belt : MADE IN GERMANYSYNCHROFLEX AT3/648 GENIII
Trademark : CONTI® SYNCHROFLEX
Manufacturer : CONTITECH (Германия)
Belt dimensions:
| Tooth step | t | мм | 3 |
| Thickness | hs | мм | 1.9 |
| Tooth height | ht | мм | 1.1 |
| Nominal length | Lp/Lw | мм | 648 |
| Number of teeth |
216 | ||
| Minimum pulley diameter | dw | мм | 15 |
| Width | bo | мм | 10 |
| Length (inch) | h | мм | 648 |
SALNIK REINFORCED (TC)
Manufacturer: NQK SF
Sizes: 28x52x10 (mm)
SPB 4500 Lw
Manufacturer: ContiTech AG
ATG10 2190 MFX - Megaflex ( ATK10 2190 BFX - BRECOFLEX )
Manufacturer: ContiTech AG
ContiTech HTD 3M 15 HP-PAZ
Manufacturer: ContiTech AG
Bearing 24060 MW33
Manufacturer: ETERNO
Sizes: 300x460x160 (mm)
Weight:: 97 (kg)
Подшипник HR32028XJ
Manufacturer: NSK-RHP
Sizes: 140x210x45 (mm)
Weight:: 5.32 (kg)
B 91 17x2310 Li / 2355 Ld
Manufacturer: ContiTech AG
K38 PU(57,15x66,67x9,52)
Manufacturer: KASTAS
Sizes: 57,15x66,67x9,52 (mm)
STUFFING BOX (REINFORCED CUFFS) NON-STANDARD (SC)
Manufacturer: STO
Sizes: 12x21x7 (mm)
Подшипник 843/832
Manufacturer: NSK-RHP
Sizes: 76.2x168.275x53.975 (mm)
Weight:: 5.85 (kg)
INSTALLING BEARINGS
Approximately 16% of all early pill accidents are caused by faulty mounting (generally excessive force) and lack of proper tools.
DROPPING BEARINGS
The need for dismantling (removal) of the bearing can be caused by several reasons: failure of the bearings, disassembly of other parts of the mechanism, and so on.
SELECTION OF FUEL OILS
The use of grease to lubricate the bearings ensures smooth operation and maximum reliability of bearings, even in extreme conditions.
