ContiTech AGAT3/648 GEN III ( АТ3 648 GENIII )
Specifications
Identification on the belt : MADE IN GERMANYSYNCHROFLEX AT3/648 GENIII
Trademark : CONTI® SYNCHROFLEX
Manufacturer : CONTITECH (Германия)
Belt dimensions:
| Tooth step | t | мм | 3 |
| Thickness | hs | мм | 1.9 |
| Tooth height | ht | мм | 1.1 |
| Nominal length | Lp/Lw | мм | 648 |
| Number of teeth |
216 | ||
| Minimum pulley diameter | dw | мм | 15 |
| Width | bo | мм | 10 |
| Length (inch) | h | мм | 648 |
Bearing 31318 (27318E)
Manufacturer: TMB
Sizes: 90x190x47 (mm)
Weight:: 5.4 (kg)
O-RING
Manufacturer: NQK SF
Sizes: 74.00x83.00x4.50 (mm)
Подшипник FNTA-1226
Manufacturer: NSK-RHP
Sizes: 12x26x2 (mm)
Weight:: 0.003 (kg)
3.53 NBR 70(085,32x03,53)
Manufacturer: KASTAS
O-RING
Manufacturer: NQK SF
Sizes: 145.00x149.00x2.00 (mm)
Подшипник NUP 215 E
Manufacturer: NACHI
Sizes: 75x130x25 (mm)
Weight:: 1.38 (kg)
2.62 NBR 70(069,52x02,62)
Manufacturer: KASTAS
Подшипник NP 310
Manufacturer: NACHI
Sizes: 50x95x27 (mm)
Weight:: 1.14 (kg)
Bearing 6013
Manufacturer: ETERNO
Sizes: 65x100x18 (mm)
Weight:: 0.458 (kg)
Подшипник NUP 260
Manufacturer: NACHI
Sizes: 300x540x85 (mm)
Weight:: 88.9 (kg)
INSTALLING BEARINGS
Approximately 16% of all early pill accidents are caused by faulty mounting (generally excessive force) and lack of proper tools.
DROPPING BEARINGS
The need for dismantling (removal) of the bearing can be caused by several reasons: failure of the bearings, disassembly of other parts of the mechanism, and so on.
SELECTION OF FUEL OILS
The use of grease to lubricate the bearings ensures smooth operation and maximum reliability of bearings, even in extreme conditions.
