ContiTech AGAT3/639 GEN III ( АТ3 639 GENIII )
Specifications
Identification on the belt : MADE IN GERMANYSYNCHROFLEX AT3/639 GENIII
Trademark : CONTI® SYNCHROFLEX
Manufacturer : CONTITECH (Германия)
Belt dimensions:
| Tooth step | t | мм | 3 |
| Thickness | hs | мм | 1.9 |
| Tooth height | ht | мм | 1.1 |
| Nominal length | Lp/Lw | мм | 639 |
| Number of teeth |
213 | ||
| Minimum pulley diameter | dw | мм | 15 |
| Width | bo | мм | 10 |
| Length (inch) | h | мм | 639 |
K752 PTFE/NBR(130x119x4,2)
Manufacturer: KASTAS
Sizes: 130x119x4,2 (mm)
Bearing 18X15
Manufacturer: INA-FAG
Sizes: 47.650x82.550x38.480 (mm)
Weight:: 0.759 (kg)
ПОДШИПНИК РОЛИКОВЫЙ САМОУСТАНАВЛИВАЮЩИЙСЯ 23220-E1A-K-M
Manufacturer: FAG
Sizes: 100x180x60.3 (mm)
Подшипник 23224AX
Manufacturer: NACHI
Sizes: 120x215x76 (mm)
Weight:: 12.3 (kg)
K22 PU(20x32x6)
Manufacturer: KASTAS
Sizes: 20x32x6 (mm)
ПОДШИПНИКОВЫЙ УЗЕЛ ШАРИКОВЫЙ РАДИАЛЬНЫЙ RCJL50-N
Manufacturer: INA-FAG
AT5 DD
Manufacturer: ContiTech AG
Подшипник 7322CDF
Manufacturer: NACHI
Sizes: 110x240x50 (mm)
Weight:: 11 (kg)
SEALS (REINFORCED SEAL) (FY-P)
Manufacturer: FEKO
Sizes: 45x52x4 (mm)
K42 (190x165x45)
Manufacturer: KASTAS
Sizes: 190x165x45 (mm)
INSTALLING BEARINGS
Approximately 16% of all early pill accidents are caused by faulty mounting (generally excessive force) and lack of proper tools.
DROPPING BEARINGS
The need for dismantling (removal) of the bearing can be caused by several reasons: failure of the bearings, disassembly of other parts of the mechanism, and so on.
SELECTION OF FUEL OILS
The use of grease to lubricate the bearings ensures smooth operation and maximum reliability of bearings, even in extreme conditions.
