ContiTech AGAT3/639 GEN III ( АТ3 639 GENIII )
Specifications
Identification on the belt : MADE IN GERMANYSYNCHROFLEX AT3/639 GENIII
Trademark : CONTI® SYNCHROFLEX
Manufacturer : CONTITECH (Германия)
Belt dimensions:
| Tooth step | t | мм | 3 |
| Thickness | hs | мм | 1.9 |
| Tooth height | ht | мм | 1.1 |
| Nominal length | Lp/Lw | мм | 639 |
| Number of teeth |
213 | ||
| Minimum pulley diameter | dw | мм | 15 |
| Width | bo | мм | 10 |
| Length (inch) | h | мм | 639 |
O-RING
Manufacturer: NQK SF
Sizes: 7.52x14.58x3.53 (mm)
HTD 8M 2456 ( HTD8M 2456 -V, -M, -MFX )
Manufacturer: ContiTech AG
Подшипник 53314
Manufacturer: NACHI
Sizes: 70x125x44.2 (mm)
Weight:: 0.73 (kg)
Mechanical seal RM 580-1 3/4"
Manufacturer: RiMi
SEALS (REINFORCED SEAL) (ARS-B)
Manufacturer: FEKO
Sizes: 22x32x6 (mm)
Bearing S6209
Manufacturer: ETERNO
Sizes: 45.00x85.00x19.00 (mm)
Weight:: 410 (kg)
SEALS (REINFORCED SEAL) (AS)
Manufacturer: FEKO
Sizes: 40x55x8 (mm)
Bearing 6315N (50315)
Manufacturer: TMB
Sizes: 75x160x37 (mm)
Weight:: 3.05 (kg)
Зубчатый полиуретановый ремень 75 ATG10
Manufacturer: ContiTech AG
Bearing B10
Manufacturer: INA-FAG
Sizes: 26.988x50.012x19.050 (mm)
Weight:: 0.162 (kg)
INSTALLING BEARINGS
Approximately 16% of all early pill accidents are caused by faulty mounting (generally excessive force) and lack of proper tools.
DROPPING BEARINGS
The need for dismantling (removal) of the bearing can be caused by several reasons: failure of the bearings, disassembly of other parts of the mechanism, and so on.
SELECTION OF FUEL OILS
The use of grease to lubricate the bearings ensures smooth operation and maximum reliability of bearings, even in extreme conditions.
