ContiTech AGAT3/549 GEN III ( АТ3 549 GENIII )
Specifications
Identification on the belt : MADE IN GERMANYSYNCHROFLEX AT3/549 GENIII
Trademark : CONTI® SYNCHROFLEX
Manufacturer : CONTITECH (Германия)
Belt dimensions:
| Tooth step | t | мм | 3 |
| Thickness | hs | мм | 1.9 |
| Tooth height | ht | мм | 1.1 |
| Nominal length | Lp/Lw | мм | 549 |
| Number of teeth |
183 | ||
| Minimum pulley diameter | dw | мм | 15 |
| Width | bo | мм | 10 |
| Length (inch) | h | мм | 549 |
K21 PU(4x10x4)
Manufacturer: KASTAS
Sizes: 4x10x4 (mm)
Bearing 16052M (7000152H)
Manufacturer: TMB
Sizes: 260x400x44 (mm)
Weight:: 22.5 (kg)
4 NBR 70(031,00x04,00)
Manufacturer: KASTAS
Торцевое уплотнение RM MG1-65
Manufacturer: RiMi
Подшипник NJ 314 E
Manufacturer: NACHI
Sizes: 70x150x35 (mm)
Weight:: 3.15 (kg)
K35 PTFE/NBR(90x100,7x4,2)
Manufacturer: KASTAS
Sizes: 90x100,7x4,2 (mm)
O-RING
Manufacturer: NQK SF
Sizes: 24.80x30.80x3.00 (mm)
SPZ 2087
Manufacturer: ContiTech AG
AT5 DD
Manufacturer: ContiTech AG
SEALS (REINFORCED SEAL) (K)
Manufacturer: FEKO
Sizes: 36.83x53.98x10 (mm)
INSTALLING BEARINGS
Approximately 16% of all early pill accidents are caused by faulty mounting (generally excessive force) and lack of proper tools.
DROPPING BEARINGS
The need for dismantling (removal) of the bearing can be caused by several reasons: failure of the bearings, disassembly of other parts of the mechanism, and so on.
SELECTION OF FUEL OILS
The use of grease to lubricate the bearings ensures smooth operation and maximum reliability of bearings, even in extreme conditions.
