ContiTech AGAT3/501 GEN III ( АТ3 501 GENIII )
Specifications
Identification on the belt : MADE IN GERMANYSYNCHROFLEX AT3/501 GENIII
Trademark : CONTI® SYNCHROFLEX
Manufacturer : CONTITECH (Германия)
Belt dimensions:
| Tooth step | t | мм | 3 |
| Thickness | hs | мм | 1.9 |
| Tooth height | ht | мм | 1.1 |
| Nominal length | Lp/Lw | мм | 501 |
| Number of teeth |
167 | ||
| Minimum pulley diameter | dw | мм | 15 |
| Width | bo | мм | 10 |
| Length (inch) | h | мм | 501 |
O-RING
Manufacturer: NQK SF
Sizes: 2.20x7.00x2.40 (mm)
Bearing NK16/20
Manufacturer: ETERNO
Sizes: 16x24x20 (mm)
Weight:: 23.9 (kg)
Bearing 7314C (36314)
Manufacturer: TMB
Sizes: 70x150x35 (mm)
Weight:: 2.65 (kg)
ПОДШИПНИКОВЫЙ УЗЕЛ ШАРИКОВЫЙ РАДИАЛЬНЫЙ RASEY50-N
Manufacturer: INA-FAG
SEALS (REINFORCED SEAL) (DY)
Manufacturer: FEKO
Sizes: 17.50x25x6.20 (mm)
K702 PTFE/NBR(250x265,5x6,3)
Manufacturer: KASTAS
Sizes: 250x265,5x6,3 (mm)
SEALS (REINFORCED SEAL) (FYT)
Manufacturer: FEKO
Sizes: 18x24x5/7 (mm)
SALNIK REINFORCED (TC)
Manufacturer: NQK SF
Sizes: 40.2x44x6/15 (mm)
SALNIK REINFORCED (TC)
Manufacturer: NQK SF
Sizes: 40x52x8 (mm)
HTD 265 5M CXP
Manufacturer: ContiTech AG
INSTALLING BEARINGS
Approximately 16% of all early pill accidents are caused by faulty mounting (generally excessive force) and lack of proper tools.
DROPPING BEARINGS
The need for dismantling (removal) of the bearing can be caused by several reasons: failure of the bearings, disassembly of other parts of the mechanism, and so on.
SELECTION OF FUEL OILS
The use of grease to lubricate the bearings ensures smooth operation and maximum reliability of bearings, even in extreme conditions.
