ContiTech AGAT3/501 GEN III ( АТ3 501 GENIII )
Specifications
Identification on the belt : MADE IN GERMANYSYNCHROFLEX AT3/501 GENIII
Trademark : CONTI® SYNCHROFLEX
Manufacturer : CONTITECH (Германия)
Belt dimensions:
| Tooth step | t | мм | 3 |
| Thickness | hs | мм | 1.9 |
| Tooth height | ht | мм | 1.1 |
| Nominal length | Lp/Lw | мм | 501 |
| Number of teeth |
167 | ||
| Minimum pulley diameter | dw | мм | 15 |
| Width | bo | мм | 10 |
| Length (inch) | h | мм | 501 |
K780 PTFE(105x110x40)
Manufacturer: KASTAS
Sizes: 105x110x40 (mm)
Подшипник 2905
Manufacturer: NACHI
Sizes: 25x45x14 (mm)
Подшипник 230/630EK
Manufacturer: NACHI
Sizes: 630x920x212 (mm)
Weight:: 487 (kg)
HTD 267 3M
Manufacturer: ContiTech AG
K73 POLYESTER/PTFE(135x140x20)
Manufacturer: KASTAS
Sizes: 135x140x20 (mm)
Bearing N336EMZ1 (2336EHZ1)
Manufacturer: TMB
Sizes: 180x380x75 (mm)
Weight:: 44 (kg)
Bearing QJ322N2M
Manufacturer: TMB
Sizes: 110x240x50 (mm)
Weight:: 12.5 (kg)
SALNIK REINFORCED (TC)
Manufacturer: NQK SF
Sizes: 64x80x8 (mm)
ПОДШИПНИК РОЛИКОВЫЙ РАДИАЛЬНЫЙ NUP213-E-TVP2
Manufacturer: FAG
Sizes: 65x120x23 (mm)
SALNIK REINFORCED (TC)
Manufacturer: NQK SF
Sizes: 44x57x9 (mm)
INSTALLING BEARINGS
Approximately 16% of all early pill accidents are caused by faulty mounting (generally excessive force) and lack of proper tools.
DROPPING BEARINGS
The need for dismantling (removal) of the bearing can be caused by several reasons: failure of the bearings, disassembly of other parts of the mechanism, and so on.
SELECTION OF FUEL OILS
The use of grease to lubricate the bearings ensures smooth operation and maximum reliability of bearings, even in extreme conditions.
