ContiTech AGAT3/450 GEN III ( АТ3 450 GENIII )
Specifications
Identification on the belt : MADE IN GERMANYSYNCHROFLEX AT3/450 GENIII
Trademark : CONTI® SYNCHROFLEX
Manufacturer : CONTITECH (Германия)
Belt dimensions:
| Tooth step | t | мм | 3 |
| Thickness | hs | мм | 1.9 |
| Tooth height | ht | мм | 1.1 |
| Nominal length | Lp/Lw | мм | 450 |
| Number of teeth |
150 | ||
| Minimum pulley diameter | dw | мм | 15 |
| Width | bo | мм | 10 |
| Length (inch) | h | мм | 450 |
Bearings K89444
Manufacturer: INA-FAG
Sizes: 220x420x40 (mm)
Weight:: 17.6 (kg)
Bearings CR-B25/70
Manufacturer: INA-FAG
Weight:: 0.32 (kg)
K37 (180x200x14,50)
Manufacturer: KASTAS
Sizes: 180x200x14,50 (mm)
Bearing NU306E (32306E)
Manufacturer: TMB
Sizes: 30x72x19 (mm)
Weight:: 0.36 (kg)
SEALS (REINFORCED SEAL) (AS)
Manufacturer: FEKO
Sizes: 340x374x22 (mm)
1.78 NBR 70(60,05x1,78)
Manufacturer: KASTAS
Bearing GAC50S
Manufacturer: TMB
Sizes: 50x80x20 (mm)
Weight:: 0.45 (kg)
STUFFING BOX (REINFORCED CUFFS) NON-STANDARD (TB4Y)
Manufacturer: STO
Sizes: 50x68x7/10 (mm)
Подшипник 6002DDU
Manufacturer: NSK-RHP
Sizes: 15x32x9 (mm)
Weight:: 0.031 (kg)
HTD 8M 3520 ( HTD8M 3520 -V, -M, -MFX )
Manufacturer: ContiTech AG
INSTALLING BEARINGS
Approximately 16% of all early pill accidents are caused by faulty mounting (generally excessive force) and lack of proper tools.
DROPPING BEARINGS
The need for dismantling (removal) of the bearing can be caused by several reasons: failure of the bearings, disassembly of other parts of the mechanism, and so on.
SELECTION OF FUEL OILS
The use of grease to lubricate the bearings ensures smooth operation and maximum reliability of bearings, even in extreme conditions.
