ContiTech AGAT3/417 GEN III ( АТ3 417 GENIII )
Specifications
Identification on the belt : MADE IN GERMANYSYNCHROFLEX AT3/417 GENIII
Trademark : CONTI® SYNCHROFLEX
Manufacturer : CONTITECH (Германия)
Belt dimensions:
| Tooth step | t | мм | 3 |
| Thickness | hs | мм | 1.9 |
| Tooth height | ht | мм | 1.1 |
| Nominal length | Lp/Lw | мм | 417 |
| Number of teeth |
139 | ||
| Minimum pulley diameter | dw | мм | 15 |
| Width | bo | мм | 10 |
| Length (inch) | h | мм | 417 |
Подшипник N 324
Manufacturer: NACHI
Sizes: 120x226x55 (mm)
Weight:: 15.1 (kg)
RPP8 4384 ( RPP 8 4384 -V, -M, -MFX )
Manufacturer: ContiTech AG
O-RING
Manufacturer: NQK SF
Sizes: 71.50x74.50x1.50 (mm)
XPC 4750 Lw / Ld ( ХРС 4750 )
Manufacturer: ContiTech AG
K07 NBR(20x30x10/7)
Manufacturer: KASTAS
Sizes: 20x30x10/7 (mm)
K33 PU(31,75x41,28x4,76)
Manufacturer: KASTAS
Sizes: 31,75x41,28x4,76 (mm)
Bearing 2306
Manufacturer: ETERNO
Sizes: 30x72x27 (mm)
Weight:: 0.5 (kg)
SEALS (REINFORCED SEAL) (ATZ)
Manufacturer: FEKO
Sizes: 20x30x5.20 (mm)
SALNIK REINFORCED (TC)
Manufacturer: NQK SF
Sizes: 57x85x10 (mm)
K31 PU/NBR/POM(150x160x14,5 )
Manufacturer: KASTAS
Sizes: 150x160x14,5 (mm)
INSTALLING BEARINGS
Approximately 16% of all early pill accidents are caused by faulty mounting (generally excessive force) and lack of proper tools.
DROPPING BEARINGS
The need for dismantling (removal) of the bearing can be caused by several reasons: failure of the bearings, disassembly of other parts of the mechanism, and so on.
SELECTION OF FUEL OILS
The use of grease to lubricate the bearings ensures smooth operation and maximum reliability of bearings, even in extreme conditions.
