ContiTech AGAT3/417 GEN III ( АТ3 417 GENIII )
Specifications
Identification on the belt : MADE IN GERMANYSYNCHROFLEX AT3/417 GENIII
Trademark : CONTI® SYNCHROFLEX
Manufacturer : CONTITECH (Германия)
Belt dimensions:
Tooth step | t | мм | 3 |
Thickness | hs | мм | 1.9 |
Tooth height | ht | мм | 1.1 |
Nominal length | Lp/Lw | мм | 417 |
Number of teeth |
139 | ||
Minimum pulley diameter | dw | мм | 15 |
Width | bo | мм | 10 |
Length (inch) | h | мм | 417 |
Подшипник 51268
Manufacturer: NACHI
Sizes: 340x460x96 (mm)
Weight:: 225 (kg)

ПОДШИПНИК РОЛИКОВЫЙ ИГОЛЬЧАТЫЙ RNAO35X45X17
Manufacturer: INA-FAG
Sizes: 35x45x17 (mm)

Bearing FC2842106
Manufacturer: TMB
Sizes: 140x210x106 (mm)
Weight:: 13.9 (kg)

Bearing S6009
Manufacturer: ETERNO
Sizes: 45.00x75.00x16.00 (mm)
Weight:: 250 (kg)

SALNIK REINFORCED (TC)
Manufacturer: NQK SF
Sizes: 24x38x5 (mm)

O-RING
Manufacturer: NQK SF
Sizes: 228.30x234.50x3.10 (mm)

Подшипник 6018ZNR
Manufacturer: NACHI
Sizes: 90x140x24 (mm)
Weight:: 1.13 (kg)

SALNIK REINFORCED (TC)
Manufacturer: NQK SF
Sizes: 54x65x10 (mm)

Bearing NF215EM (12215EH)
Manufacturer: TMB
Sizes: 75x130x25 (mm)
Weight:: 1.3 (kg)

A 99 13x2515 Li / 2545 Ld
Manufacturer: ContiTech AG


INSTALLING BEARINGS
Approximately 16% of all early pill accidents are caused by faulty mounting (generally excessive force) and lack of proper tools.

DROPPING BEARINGS
The need for dismantling (removal) of the bearing can be caused by several reasons: failure of the bearings, disassembly of other parts of the mechanism, and so on.

SELECTION OF FUEL OILS
The use of grease to lubricate the bearings ensures smooth operation and maximum reliability of bearings, even in extreme conditions.