ContiTech AGAT3/399 GEN III ( АТ3 399 GENIII )
Specifications
Identification on the belt : MADE IN GERMANYSYNCHROFLEX AT3/399 GENIII
Trademark : CONTI® SYNCHROFLEX
Manufacturer : CONTITECH (Германия)
Belt dimensions:
| Tooth step | t | мм | 3 |
| Thickness | hs | мм | 1.9 |
| Tooth height | ht | мм | 1.1 |
| Nominal length | Lp/Lw | мм | 399 |
| Number of teeth |
133 | ||
| Minimum pulley diameter | dw | мм | 15 |
| Width | bo | мм | 10 |
| Length (inch) | h | мм | 399 |
K34 (35x47x22,5)
Manufacturer: KASTAS
Sizes: 35x47x22,5 (mm)
RPP8 DD 3844 MFX - Megaflex
Manufacturer: ContiTech AG
ПОДШИПНИК РОЛИКОВЫЙ РАДИАЛЬНЫЙ NU220-E-TVP2
Manufacturer: FAG
Sizes: 100x180x34 (mm)
Bearing IR50x55x35
Manufacturer: INA-FAG
Sizes: 50x55x35 (mm)
Weight:: 0.112 (kg)
K26 NBR 90(60x12x27)
Manufacturer: KASTAS
Sizes: 60x12x27 (mm)
Подшипник 240KBE31+L
Manufacturer: NSK-RHP
Sizes: 240x400x128 (mm)
Weight:: 60 (kg)
Bearing N236EM (2236EH)
Manufacturer: TMB
Sizes: 180x320x52 (mm)
Weight:: 20.2 (kg)
Подшипник 7007DT
Manufacturer: NACHI
Sizes: 35x62x14 (mm)
Weight:: 0.17 (kg)
SEALS (REINFORCED SEAL) (AS)
Manufacturer: FEKO
Sizes: 41.50x61x5.50 (mm)
Bearings NKI35/20
Manufacturer: INA-FAG
Sizes: 35x50x20 (mm)
Weight:: 0.127 (kg)
INSTALLING BEARINGS
Approximately 16% of all early pill accidents are caused by faulty mounting (generally excessive force) and lack of proper tools.
DROPPING BEARINGS
The need for dismantling (removal) of the bearing can be caused by several reasons: failure of the bearings, disassembly of other parts of the mechanism, and so on.
SELECTION OF FUEL OILS
The use of grease to lubricate the bearings ensures smooth operation and maximum reliability of bearings, even in extreme conditions.
