ContiTech AGAT3/351 GEN III ( АТ3 351 GENIII )
Specifications
Identification on the belt : MADE IN GERMANYSYNCHROFLEX AT3/351 GENIII
Trademark : CONTI® SYNCHROFLEX
Manufacturer : CONTITECH (Германия)
Belt dimensions:
| Tooth step | t | мм | 3 |
| Thickness | hs | мм | 1.9 |
| Tooth height | ht | мм | 1.1 |
| Nominal length | Lp/Lw | мм | 351 |
| Number of teeth |
117 | ||
| Minimum pulley diameter | dw | мм | 15 |
| Width | bo | мм | 10 |
| Length (inch) | h | мм | 351 |
SEALS (REINFORCED SEAL) (FS)
Manufacturer: FEKO
Sizes: 94x127x9.70 (mm)
K06 NBR(16x20x3/5)
Manufacturer: KASTAS
Sizes: 16x20x3/5 (mm)
ПОДШИПНИК РОЛИКОВЫЙ САМОУСТАНАВЛИВАЮЩИЙСЯ 23030-E1A-M
Manufacturer: FAG
Sizes: 150x225x56 (mm)
Bearing NUP2176EM
Manufacturer: TMB
HTD 8M 6856 ( HTD8M 6856 -V, -M, -MFX )
Manufacturer: ContiTech AG
K22 PU(90x110x11,5)
Manufacturer: KASTAS
Sizes: 90x110x11,5 (mm)
SEALS (REINFORCED SEAL) (FH)
Manufacturer: FEKO
Sizes: 101.50x123.50x20.50 (mm)
Krestovina 50/35X185/148,4
Manufacturer: TOYO
ПОДШИПНИК РОЛИКОВЫЙ ИГОЛЬЧАТЫЙ NAO15X28X13
Manufacturer: INA-FAG
Sizes: 15x28x13 (mm)
O-RING
Manufacturer: NQK SF
Sizes: 54.40x60.60x3.10 (mm)
INSTALLING BEARINGS
Approximately 16% of all early pill accidents are caused by faulty mounting (generally excessive force) and lack of proper tools.
DROPPING BEARINGS
The need for dismantling (removal) of the bearing can be caused by several reasons: failure of the bearings, disassembly of other parts of the mechanism, and so on.
SELECTION OF FUEL OILS
The use of grease to lubricate the bearings ensures smooth operation and maximum reliability of bearings, even in extreme conditions.
