ContiTech AGAT3/351 GEN III ( АТ3 351 GENIII )
Specifications
Identification on the belt : MADE IN GERMANYSYNCHROFLEX AT3/351 GENIII
Trademark : CONTI® SYNCHROFLEX
Manufacturer : CONTITECH (Германия)
Belt dimensions:
Tooth step | t | мм | 3 |
Thickness | hs | мм | 1.9 |
Tooth height | ht | мм | 1.1 |
Nominal length | Lp/Lw | мм | 351 |
Number of teeth |
117 | ||
Minimum pulley diameter | dw | мм | 15 |
Width | bo | мм | 10 |
Length (inch) | h | мм | 351 |
ПОДШИПНИК РОЛИКОВЫЙ ИГОЛЬЧАТЫЙ С ОДНИМ НАРУЖНЫМ ШТАМПОВАННЫМ КОЛЬЦОМ, ЗАКРЫТЫМ С ОДНОЙ СТОРОНЫ BK0408
Manufacturer: INA-FAG
Sizes: 4x8x8 (mm)

Корпус KHLLP201AJ
Manufacturer: NACHI
Weight:: 0.41 (kg)

STUFFING BOX (REINFORCED CUFFS) NON-STANDARD (SPTC)
Manufacturer: STO
Sizes: 14.5x30x7/8.5 (mm)

K06 NBR(28x38x7/5)
Manufacturer: KASTAS
Sizes: 28x38x7/5 (mm)

4L 220
Manufacturer: ContiTech AG

Bearing 14116 / 14282
Manufacturer: TIMKEN
Sizes: 30.226x71.996x19.002 (mm)
Weight:: 0.345 (kg)

Manufacturer: ContiTech AG

RPP8 DD 4124 MFX - Megaflex
Manufacturer: ContiTech AG

Bearing LR5204KDDU
Manufacturer: INA-FAG
Sizes: 20x52x20.6 (mm)
Weight:: 20.6 (kg)

Bearing 31328 (27328E)
Manufacturer: TMB
Sizes: 140x300x77 (mm)
Weight:: 22.5 (kg)


INSTALLING BEARINGS
Approximately 16% of all early pill accidents are caused by faulty mounting (generally excessive force) and lack of proper tools.

DROPPING BEARINGS
The need for dismantling (removal) of the bearing can be caused by several reasons: failure of the bearings, disassembly of other parts of the mechanism, and so on.

SELECTION OF FUEL OILS
The use of grease to lubricate the bearings ensures smooth operation and maximum reliability of bearings, even in extreme conditions.