ContiTech AGAT3/300 GEN III ( АТ3 300 GENIII )
Specifications
Identification on the belt : MADE IN GERMANYSYNCHROFLEX AT3/300 GENIII
Trademark : CONTI® SYNCHROFLEX
Manufacturer : CONTITECH (Германия)
Belt dimensions:
| Tooth step | t | мм | 3 |
| Thickness | hs | мм | 1.9 |
| Tooth height | ht | мм | 1.1 |
| Nominal length | Lp/Lw | мм | 300 |
| Number of teeth |
100 | ||
| Minimum pulley diameter | dw | мм | 15 |
| Width | bo | мм | 10 |
| Length (inch) | h | мм | 300 |
K09 PU(130x142x5,5/10)
Manufacturer: KASTAS
Sizes: 130x142x5,5/10 (mm)
SEALS (REINFORCED SEAL) (F)
Manufacturer: FEKO
Sizes: 28x42.90x9.50 (mm)
Mechanical seal RM 112-60
Manufacturer: RiMi
Подшипник 319440DA-2LS
Manufacturer: SKF
Sizes: 200x270x80 (mm)
Weight:: 13 (kg)
K753 PTFE/NBR(28x17x4,2)
Manufacturer: KASTAS
Sizes: 28x17x4,2 (mm)
Bearing FC2436105 (672724)
Manufacturer: TMB
Sizes: 120x180x105 (mm)
Weight:: 10.5 (kg)
Bearing LR5207KDDU
Manufacturer: INA-FAG
Sizes: 35x80x27 (mm)
Weight:: 27 (kg)
AT20 DD
Manufacturer: ContiTech AG
Bearing 29440 (9039440)
Manufacturer: TMB
Sizes: 200x400x122 (mm)
Weight:: 72 (kg)
ПОДШИПНИК РОЛИКОВЫЙ РАДИАЛЬНЫЙ NU303-E-TVP2
Manufacturer: FAG
Sizes: 17x47x14 (mm)
INSTALLING BEARINGS
Approximately 16% of all early pill accidents are caused by faulty mounting (generally excessive force) and lack of proper tools.
DROPPING BEARINGS
The need for dismantling (removal) of the bearing can be caused by several reasons: failure of the bearings, disassembly of other parts of the mechanism, and so on.
SELECTION OF FUEL OILS
The use of grease to lubricate the bearings ensures smooth operation and maximum reliability of bearings, even in extreme conditions.
