ContiTech AGAT3/270 GEN III ( АТ3 270 GENIII )
Specifications
Identification on the belt : MADE IN GERMANYSYNCHROFLEX AT3/270 GENIII
Trademark : CONTI® SYNCHROFLEX
Manufacturer : CONTITECH (Германия)
Belt dimensions:
| Tooth step | t | мм | 3 |
| Thickness | hs | мм | 1.9 |
| Tooth height | ht | мм | 1.1 |
| Nominal length | Lp/Lw | мм | 270 |
| Number of teeth |
90 | ||
| Minimum pulley diameter | dw | мм | 15 |
| Width | bo | мм | 10 |
| Length (inch) | h | мм | 270 |
K11 TPE(200x208,6x7/5,3 )
Manufacturer: KASTAS
Sizes: 200x208,6x7/5,3 (mm)
SEALS (REINFORCED SEAL) (F)
Manufacturer: FEKO
Sizes: 42.60x55x7 (mm)
Подшипник 697 DD
Manufacturer: NSK-RHP
Sizes: 7x17x5 (mm)
Weight:: 0.005 (kg)
Bearing 6204P4
Manufacturer: TMB
Sizes: 20x47x14 (mm)
Weight:: 0.11 (kg)
ПОДШИПНИК ШАРИКОВЫЙ РАДИАЛЬНО-СФЕРИЧЕСКИЙ 1214-K-TVH-C3
Manufacturer: FAG
Sizes: 70x125x24 (mm)
K37 (35x50x11,50)
Manufacturer: KASTAS
Sizes: 35x50x11,50 (mm)
4400 SLV8 DD MEGADYNE ISORAN
Manufacturer: ContiTech AG
T5 DD
Manufacturer: ContiTech AG
Bearing 6321 (321)
Manufacturer: TMB
Sizes: 105x225x49 (mm)
Weight:: 8.15 (kg)
2.5 NBR 70(022,50x02,50)
Manufacturer: KASTAS
INSTALLING BEARINGS
Approximately 16% of all early pill accidents are caused by faulty mounting (generally excessive force) and lack of proper tools.
DROPPING BEARINGS
The need for dismantling (removal) of the bearing can be caused by several reasons: failure of the bearings, disassembly of other parts of the mechanism, and so on.
SELECTION OF FUEL OILS
The use of grease to lubricate the bearings ensures smooth operation and maximum reliability of bearings, even in extreme conditions.
