ContiTech AGAT3/267 GEN III ( АТ3 267 GENIII )
Specifications
Identification on the belt : MADE IN GERMANYSYNCHROFLEX AT3/267 GENIII
Trademark : CONTI® SYNCHROFLEX
Manufacturer : CONTITECH (Германия)
Belt dimensions:
| Tooth step | t | мм | 3 |
| Thickness | hs | мм | 1.9 |
| Tooth height | ht | мм | 1.1 |
| Nominal length | Lp/Lw | мм | 267 |
| Number of teeth |
89 | ||
| Minimum pulley diameter | dw | мм | 15 |
| Width | bo | мм | 10 |
| Length (inch) | h | мм | 267 |
SEALS (REINFORCED SEAL) (FRS)
Manufacturer: FEKO
Sizes: 80x100x13 (mm)
SEALS (REINFORCED SEAL) (FS)
Manufacturer: FEKO
Sizes: 15x26x4 (mm)
K50 NBR(135x115x14)
Manufacturer: KASTAS
Sizes: 135x115x14 (mm)
Подшипник 85TMP12
Manufacturer: NSK-RHP
Sizes: 85x125x31 (mm)
RPP14 3696 ( RPP 14 3696 -V, -M, -MFX )
Manufacturer: ContiTech AG
K40 PU/POM(55x40x9,5)
Manufacturer: KASTAS
Sizes: 55x40x9,5 (mm)
K37 (20x30x8)
Manufacturer: KASTAS
Sizes: 20x30x8 (mm)
K68 POM(110x116x7,5)
Manufacturer: KASTAS
Sizes: 110x116x7,5 (mm)
ПОДШИПНИК РОЛИКОВЫЙ ИГОЛЬЧАТЫЙ БЕЗ КОЛЕЦ K16X22X20
Manufacturer: INA-FAG
Sizes: 16x22x20 (mm)
17x2540 B 100
Manufacturer: ContiTech AG
INSTALLING BEARINGS
Approximately 16% of all early pill accidents are caused by faulty mounting (generally excessive force) and lack of proper tools.
DROPPING BEARINGS
The need for dismantling (removal) of the bearing can be caused by several reasons: failure of the bearings, disassembly of other parts of the mechanism, and so on.
SELECTION OF FUEL OILS
The use of grease to lubricate the bearings ensures smooth operation and maximum reliability of bearings, even in extreme conditions.
