ContiTech AGAT3/252 GEN III ( АТ3 252 GENIII )
Specifications
Identification on the belt : MADE IN GERMANYSYNCHROFLEX AT3/252 GENIII
Trademark : CONTI® SYNCHROFLEX
Manufacturer : CONTITECH (Германия)
Belt dimensions:
| Tooth step | t | мм | 3 |
| Thickness | hs | мм | 1.9 |
| Tooth height | ht | мм | 1.1 |
| Nominal length | Lp/Lw | мм | 252 |
| Number of teeth |
84 | ||
| Minimum pulley diameter | dw | мм | 15 |
| Width | bo | мм | 10 |
| Length (inch) | h | мм | 252 |
SEALS (REINFORCED SEAL) (A)
Manufacturer: FEKO
Sizes: 25x37x7 (mm)
Корпус UCF320
Manufacturer: NACHI
Weight:: 24.8 (kg)
Подшипник 7316CDB
Manufacturer: NACHI
Sizes: 80x170x39 (mm)
Weight:: 4.18 (kg)
Подшипник 7218 A
Manufacturer: NSK-RHP
Sizes: 90x160x30 (mm)
Weight:: 2.25 (kg)
Bearing 14125A / 14274
Manufacturer: TIMKEN
Sizes: 31.75x69.012x19.845 (mm)
Weight:: 0.348 (kg)
PJ 1915 / 754 J
Manufacturer: ContiTech AG
RPP8 DD 3356 MFX - Megaflex
Manufacturer: ContiTech AG
Подшипник 21306AX
Manufacturer: NACHI
Sizes: 30x72x19 (mm)
Weight:: 0.43 (kg)
SEALS (REINFORCED SEAL) (ARS)
Manufacturer: FEKO
Sizes: 18x35x7 (mm)
O-RING
Manufacturer: NQK SF
Sizes: 387.00x401.00x7.00 (mm)
INSTALLING BEARINGS
Approximately 16% of all early pill accidents are caused by faulty mounting (generally excessive force) and lack of proper tools.
DROPPING BEARINGS
The need for dismantling (removal) of the bearing can be caused by several reasons: failure of the bearings, disassembly of other parts of the mechanism, and so on.
SELECTION OF FUEL OILS
The use of grease to lubricate the bearings ensures smooth operation and maximum reliability of bearings, even in extreme conditions.
