ContiTech AGAT3/201 GEN III ( АТ3 201 GENIII )
Specifications
Identification on the belt : MADE IN GERMANYSYNCHROFLEX AT3/201 GENIII
Trademark : CONTI® SYNCHROFLEX
Manufacturer : CONTITECH (Германия)
Belt dimensions:
| Tooth step | t | мм | 3 |
| Thickness | hs | мм | 1.9 |
| Tooth height | ht | мм | 1.1 |
| Nominal length | Lp/Lw | мм | 201 |
| Number of teeth |
67 | ||
| Minimum pulley diameter | dw | мм | 15 |
| Width | bo | мм | 10 |
| Length (inch) | h | мм | 201 |
T10 DD
Manufacturer: ContiTech AG
ПОДШИПНИК РОЛИКОВЫЙ РАДИАЛЬНЫЙ NJ2332-E-M1 + HJ2332-E
Manufacturer: FAG
Sizes: 160x340x114 (mm)
AT5 DD
Manufacturer: ContiTech AG
Bearing 7234 C
Manufacturer: ETERNO
Sizes: 170x310x52 (mm)
Weight:: 19.69 (kg)
Bearing 6014 2RS
Manufacturer: ETERNO
Sizes: 70x110x20 (mm)
Weight:: 0.635 (kg)
Подшипник NU 313
Manufacturer: NSK-RHP
Sizes: 65x140x33 (mm)
Weight:: 2.23 (kg)
K21 PU(115x135x15)
Manufacturer: KASTAS
Sizes: 115x135x15 (mm)
SEALS (REINFORCED SEAL) (AS)
Manufacturer: FEKO
Sizes: 25x62x10 (mm)
ПОДШИПНИК РОЛИКОВЫЙ САМОУСТАНАВЛИВАЮЩИЙСЯ 23136-E1-TVPB
Manufacturer: FAG
Sizes: 180x300x96 (mm)
ContiTech HTD14M 55 HP-PAZ
Manufacturer: ContiTech AG
INSTALLING BEARINGS
Approximately 16% of all early pill accidents are caused by faulty mounting (generally excessive force) and lack of proper tools.
DROPPING BEARINGS
The need for dismantling (removal) of the bearing can be caused by several reasons: failure of the bearings, disassembly of other parts of the mechanism, and so on.
SELECTION OF FUEL OILS
The use of grease to lubricate the bearings ensures smooth operation and maximum reliability of bearings, even in extreme conditions.
