ContiTech AGAT3/150 GEN III ( АТ3 150 GENIII )
Specifications
Identification on the belt : MADE IN GERMANYSYNCHROFLEX AT3/150 GENIII
Trademark : CONTI® SYNCHROFLEX
Manufacturer : CONTITECH (Германия)
Belt dimensions:
| Tooth step | t | мм | 3 |
| Thickness | hs | мм | 1.9 |
| Tooth height | ht | мм | 1.1 |
| Nominal length | Lp/Lw | мм | 150 |
| Number of teeth |
50 | ||
| Minimum pulley diameter | dw | мм | 15 |
| Width | bo | мм | 10 |
| Length (inch) | h | мм | 150 |
Подшипник HR32234J
Manufacturer: NSK-RHP
Sizes: 170x310x91 (mm)
Weight:: 28 (kg)
K68 POM(20x23x2,3)
Manufacturer: KASTAS
Sizes: 20x23x2,3 (mm)
Bearing 24038 MW33
Manufacturer: ETERNO
Sizes: 190x290x100 (mm)
Weight:: 24.5 (kg)
SEALS (REINFORCED SEAL) (AS)
Manufacturer: FEKO
Sizes: 90x115x13 (mm)
ПОДШИПНИК ШПИНДЕЛЬНЫЙ HSS71902-E-T-P4S
Manufacturer: FAG
Sizes: 15x28x7 (mm)
AT5 620 GEN III
Manufacturer: ContiTech AG
K753 PTFE/NBR(65x54x4,2)
Manufacturer: KASTAS
Sizes: 65x54x4,2 (mm)
Bearing IR25x29x20
Manufacturer: INA-FAG
Sizes: 25x29x20 (mm)
Weight:: 0.255 (kg)
Bearing 22317 KMW33
Manufacturer: ETERNO
Sizes: 85x180x60 (mm)
Weight:: 6.78 (kg)
RPP14 4760 ( RPP 14 4760 -V, -M, -MFX )
Manufacturer: ContiTech AG
INSTALLING BEARINGS
Approximately 16% of all early pill accidents are caused by faulty mounting (generally excessive force) and lack of proper tools.
DROPPING BEARINGS
The need for dismantling (removal) of the bearing can be caused by several reasons: failure of the bearings, disassembly of other parts of the mechanism, and so on.
SELECTION OF FUEL OILS
The use of grease to lubricate the bearings ensures smooth operation and maximum reliability of bearings, even in extreme conditions.
