ContiTech AGAT3/150 GEN III ( АТ3 150 GENIII )
Specifications
Identification on the belt : MADE IN GERMANYSYNCHROFLEX AT3/150 GENIII
Trademark : CONTI® SYNCHROFLEX
Manufacturer : CONTITECH (Германия)
Belt dimensions:
Tooth step | t | мм | 3 |
Thickness | hs | мм | 1.9 |
Tooth height | ht | мм | 1.1 |
Nominal length | Lp/Lw | мм | 150 |
Number of teeth |
50 | ||
Minimum pulley diameter | dw | мм | 15 |
Width | bo | мм | 10 |
Length (inch) | h | мм | 150 |
MEGADYNE ISORAN 1092 RPP14 ( RPP 14M 1092 )
Manufacturer: ContiTech AG
K16 (125x108x26,5)
Manufacturer: KASTAS
Sizes: 125x108x26,5 (mm)
Подшипник 6911ZNR
Manufacturer: NACHI
Sizes: 55x80x13 (mm)
Weight:: 0.18 (kg)
ПОДШИПНИК ШАРИКОВЫЙ РАДИАЛЬНО-СФЕРИЧЕСКИЙ 1228-M
Manufacturer: FAG
Sizes: 140x250x50 (mm)
ПОДШИПНИК РОЛИКОВЫЙ ИГОЛЬЧАТЫЙ NKI55/25-TV
Manufacturer: INA
Sizes: 55x72x25 (mm)
K705 PTFE/NBR(90x102,2x8,1)
Manufacturer: KASTAS
Sizes: 90x102,2x8,1 (mm)
AT20 DD
Manufacturer: ContiTech AG
SEALS (REINFORCED SEAL) (FH)
Manufacturer: FEKO
Sizes: 56.20x81x25.50 (mm)
O-RING
Manufacturer: NQK SF
Sizes: 405.00x425.00x10.00 (mm)
ПОДШИПНИК ИГОЛЬЧАТЫЙ РАДИАЛЬНЫЙ HK6032
Manufacturer: INA
Sizes: 60x68x32 (mm)
Weight:: 0.136 (kg)
INSTALLING BEARINGS
Approximately 16% of all early pill accidents are caused by faulty mounting (generally excessive force) and lack of proper tools.
DROPPING BEARINGS
The need for dismantling (removal) of the bearing can be caused by several reasons: failure of the bearings, disassembly of other parts of the mechanism, and so on.
SELECTION OF FUEL OILS
The use of grease to lubricate the bearings ensures smooth operation and maximum reliability of bearings, even in extreme conditions.