ContiTech AGT10/4780 DL ( DT10 4780 )
Specifications
Identification on the belt : MADE IN GERMANYSYNCHROFLEX T10/4780
Trademark : CONTI® SYNCHROFLEX
Manufacturer : CONTITECH (Германия)
Belt dimensions:
| Tooth step | t | inch (1/10) | 60 |
| Tooth step | t | мм | 10 |
| Thickness | hs | мм | 7 |
| Tooth height | ht | мм | 2.5 |
| Nominal length | Lp/Lw | мм | 4780 |
| Number of teeth |
478 | ||
| Minimum pulley diameter | dw | мм | 12 |
| Height | h | мм | 10 |
Торцевое уплотнение Торцевое уплотнение
Manufacturer: RiMi
Bearing 32230P5 (D7530E)
Manufacturer: TMB
Sizes: 150x270x154 (mm)
Weight:: 18 (kg)
Bearing 51105
Manufacturer: ETERNO
Sizes: 25x42x11 (mm)
Weight:: 0.056 (kg)
K22 NBR(28x38x10)
Manufacturer: KASTAS
Sizes: 28x38x10 (mm)
Bearing FND 473 M
Manufacturer: ETERNO
Sizes: 45x78x34 (mm)
Weight:: 730 (kg)
Bearing NJ2212EM (42512EH)
Manufacturer: TMB
Sizes: 60x110x28 (mm)
Weight:: 1.1 (kg)
ПОДШИПНИК РОЛИКОВЫЙ САМОУСТАНАВЛИВАЮЩИЙСЯ 23064-K-MB
Manufacturer: FAG
Sizes: 320x480x121 (mm)
ATG10 5540 MFX - Megaflex ( ATK10 5540 BFX - BRECOFLEX )
Manufacturer: ContiTech AG
SEALS (REINFORCED SEAL) (FH)
Manufacturer: FEKO
Sizes: 70x90x13.50 (mm)
AT10 DD
Manufacturer: ContiTech AG
INSTALLING BEARINGS
Approximately 16% of all early pill accidents are caused by faulty mounting (generally excessive force) and lack of proper tools.
DROPPING BEARINGS
The need for dismantling (removal) of the bearing can be caused by several reasons: failure of the bearings, disassembly of other parts of the mechanism, and so on.
SELECTION OF FUEL OILS
The use of grease to lubricate the bearings ensures smooth operation and maximum reliability of bearings, even in extreme conditions.
