ContiTech AGT10/1350 DL ( DT10 1350 )
Specifications
Identification on the belt : MADE IN GERMANYSYNCHROFLEX T10/1320
Trademark : CONTI® SYNCHROFLEX
Manufacturer : CONTITECH (Германия)
Belt dimensions:
Tooth step | t | inch (1/10) | 60 |
Tooth step | t | мм | 10 |
Thickness | hs | мм | 7 |
Tooth height | ht | мм | 2.5 |
Nominal length | Lp/Lw | мм | 1350 |
Number of teeth |
135 | ||
Minimum pulley diameter | dw | мм | 12 |
Height | h | мм | 10 |
Bearing IR50x58x40
Manufacturer: INA-FAG
Sizes: 50x58x40 (mm)
Weight:: 0.209 (kg)

Bearing GS81240
Manufacturer: INA-FAG
Sizes: 200x280x62 (mm)
Weight:: 4.410 (kg)

AT10 DD
Manufacturer: ContiTech AG

SEALS (REINFORCED SEAL) (FYZ)
Manufacturer: FEKO
Sizes: 60x75.66x12/14 (mm)

CX 124 CX 3215 Ld
Manufacturer: ContiTech AG

K781 PTFE(45x50x30 )
Manufacturer: KASTAS
Sizes: 45x50x30 (mm)

Bearing K80X88X30
Manufacturer: ETERNO
Sizes: 80x88x30 (mm)
Weight:: 0.138 (kg)

ПОДШИПНИК ШПИНДЕЛЬНЫЙ B7044-C-T-P4S
Manufacturer: FAG
Sizes: 220x340x56 (mm)

Подшипник 6912N
Manufacturer: NACHI
Sizes: 60x85x13 (mm)
Weight:: 0.195 (kg)

Bearing N2208EM (2508EH)
Manufacturer: TMB
Sizes: 40x80x23 (mm)
Weight:: 0.43 (kg)


INSTALLING BEARINGS
Approximately 16% of all early pill accidents are caused by faulty mounting (generally excessive force) and lack of proper tools.

DROPPING BEARINGS
The need for dismantling (removal) of the bearing can be caused by several reasons: failure of the bearings, disassembly of other parts of the mechanism, and so on.

SELECTION OF FUEL OILS
The use of grease to lubricate the bearings ensures smooth operation and maximum reliability of bearings, even in extreme conditions.