ContiTech AGT10/1320 DL ( DT10 1320 )
Specifications
Identification on the belt : MADE IN GERMANYSYNCHROFLEX T10/1320
Trademark : CONTI® SYNCHROFLEX
Manufacturer : CONTITECH (Германия)
Belt dimensions:
Tooth step | t | inch (1/10) | 60 |
Tooth step | t | мм | 10 |
Thickness | hs | мм | 7 |
Tooth height | ht | мм | 2.5 |
Nominal length | Lp/Lw | мм | 1320 |
Number of teeth |
132 | ||
Minimum pulley diameter | dw | мм | 12 |
Height | h | мм | 10 |
K39 (10x17x6,5)
Manufacturer: KASTAS
Sizes: 10x17x6,5 (mm)
Торцевое уплотнение RM MG1-55
Manufacturer: RiMi
Z 23,75 10x605 Li / 628 Ld
Manufacturer: ContiTech AG
ПОДШИПНИК РОЛИКОВЫЙ РАДИАЛЬНЫЙ САМОЦЕНТРИРУЮЩИЙСЯ 23160-B-MB
Manufacturer: FAG
Sizes: 300x500x160 (mm)
Weight:: 134 (kg)
Made in USA ContiTech 14GTR-1120
Manufacturer: ContiTech AG
Подшипник 241/710CAK30E4
Manufacturer: NSK
Sizes: 710x1150x438 (mm)
Weight:: 1730 (kg)
SEALS (REINFORCED SEAL) (A)
Manufacturer: FEKO
Sizes: 75x85x8 (mm)
Bearing 628/8-Z (2060088)
Manufacturer: TMB
Sizes: 8x16x5 (mm)
Weight:: 0.0036 (kg)
Bearing 61908 2RS
Manufacturer: ETERNO
Sizes: 40x62x12 (mm)
Weight:: 0.11 (kg)
K21 NBR(5x12x5)
Manufacturer: KASTAS
Sizes: 5x12x5 (mm)
INSTALLING BEARINGS
Approximately 16% of all early pill accidents are caused by faulty mounting (generally excessive force) and lack of proper tools.
DROPPING BEARINGS
The need for dismantling (removal) of the bearing can be caused by several reasons: failure of the bearings, disassembly of other parts of the mechanism, and so on.
SELECTION OF FUEL OILS
The use of grease to lubricate the bearings ensures smooth operation and maximum reliability of bearings, even in extreme conditions.