ContiTech AGT10/1240 DL ( DT10 1240 )
Specifications
Identification on the belt : MADE IN GERMANYSYNCHROFLEX T10/1240
Trademark : CONTI® SYNCHROFLEX
Manufacturer : CONTITECH (Германия)
Belt dimensions:
Tooth step | t | inch (1/10) | 60 |
Tooth step | t | мм | 10 |
Thickness | hs | мм | 7 |
Tooth height | ht | мм | 2.5 |
Nominal length | Lp/Lw | мм | 1240 |
Number of teeth |
124 | ||
Minimum pulley diameter | dw | мм | 12 |
Height | h | мм | 10 |
Зубчатый полиуретановый ремень 25,4 мм 100 H MEGALINEAR ( 25,4 мм 100H )
Manufacturer: ContiTech AG
Подшипник 22215EAKE4
Manufacturer: NSK-RHP
Sizes: 75x130x31 (mm)
Weight:: 1.64 (kg)
Подшипник 53336U
Manufacturer: NACHI
Sizes: 180x300x109 (mm)
Weight:: 32 (kg)
BB194 ( ВВ 194 ) Le= 4997 мм
Manufacturer: ContiTech AG
Bearing NJ305M (42305H)
Manufacturer: TMB
Sizes: 25x62x17 (mm)
Weight:: 0.24 (kg)
Подшипник 24048E
Manufacturer: NACHI
Sizes: 240x360x118 (mm)
Weight:: 43.3 (kg)
SEALS (REINFORCED SEAL) (BS)
Manufacturer: FEKO
Sizes: 139.70x171.45x15.86 (mm)
Bearing NJ248EM (42248EH)
Manufacturer: TMB
Sizes: 240x440x72 (mm)
Weight:: 53 (kg)
CX 53 CX 1411 Ld
Manufacturer: ContiTech AG
SEALS (REINFORCED SEAL) (ARS)
Manufacturer: FEKO
Sizes: 35x62x10 (mm)
INSTALLING BEARINGS
Approximately 16% of all early pill accidents are caused by faulty mounting (generally excessive force) and lack of proper tools.
DROPPING BEARINGS
The need for dismantling (removal) of the bearing can be caused by several reasons: failure of the bearings, disassembly of other parts of the mechanism, and so on.
SELECTION OF FUEL OILS
The use of grease to lubricate the bearings ensures smooth operation and maximum reliability of bearings, even in extreme conditions.