ContiTech AGT10/1210 DL ( DT10 1210 )
Specifications
Identification on the belt : MADE IN GERMANYSYNCHROFLEX T10/1210
Trademark : CONTI® SYNCHROFLEX
Manufacturer : CONTITECH (Германия)
Belt dimensions:
| Tooth step | t | inch (1/10) | 60 |
| Tooth step | t | мм | 10 |
| Thickness | hs | мм | 7 |
| Tooth height | ht | мм | 2.5 |
| Nominal length | Lp/Lw | мм | 1210 |
| Number of teeth |
121 | ||
| Minimum pulley diameter | dw | мм | 12 |
| Height | h | мм | 10 |
Торцевое уплотнение RM Z1-50
Manufacturer: RiMi
SEALS (REINFORCED SEAL) (A)
Manufacturer: FEKO
Sizes: 25x38x7 (mm)
STUFFING BOX (REINFORCED CUFFS) NON-STANDARD ()
Manufacturer: STO
Sizes: 100x124/157.8x15 (mm)
T20 DD
Manufacturer: ContiTech AG
SEALS (REINFORCED SEAL) (AS)
Manufacturer: FEKO
Sizes: 45x85x10 (mm)
ПОДШИПНИКОВЫЙ УЗЕЛ ШАРИКОВЫЙ РАДИАЛЬНЫЙ RTUE65-214
Manufacturer: INA-FAG
SEALS (REINFORCED SEAL) (AS)
Manufacturer: FEKO
Sizes: 18x25x7 (mm)
ПОДШИПНИК РОЛИКОВЫЙ КОНИЧЕСКИЙ 31322-X
Manufacturer: FAG
Sizes: 110x240x63 (mm)
Подшипник RNA5912
Manufacturer: NSK-RHP
Sizes: 68x85x34 (mm)
Weight:: 0.415 (kg)
K36 (45x55x10,5)
Manufacturer: KASTAS
Sizes: 45x55x10,5 (mm)
INSTALLING BEARINGS
Approximately 16% of all early pill accidents are caused by faulty mounting (generally excessive force) and lack of proper tools.
DROPPING BEARINGS
The need for dismantling (removal) of the bearing can be caused by several reasons: failure of the bearings, disassembly of other parts of the mechanism, and so on.
SELECTION OF FUEL OILS
The use of grease to lubricate the bearings ensures smooth operation and maximum reliability of bearings, even in extreme conditions.
