ContiTech AGT10/630 DL ( DT10 630 )
Specifications
Identification on the belt : MADE IN GERMANYSYNCHROFLEX T10/630
Trademark : CONTI® SYNCHROFLEX
Manufacturer : CONTITECH (Германия)
Belt dimensions:
| Tooth step | t | inch (1/10) | 60 |
| Tooth step | t | мм | 10 |
| Thickness | hs | мм | 7 |
| Tooth height | ht | мм | 2.5 |
| Nominal length | Lp/Lw | мм | 630 |
| Number of teeth |
63 | ||
| Minimum pulley diameter | dw | мм | 12 |
| Height | h | мм | 10 |
SALNIK REINFORCED (TC)
Manufacturer: NQK SF
Sizes: 105x140x15 (mm)
3.53 FKM 80(074,61x03,53 )
Manufacturer: KASTAS
K38 PU(25x35x10)
Manufacturer: KASTAS
Sizes: 25x35x10 (mm)
ПОДШИПНИКОВЫЙ УЗЕЛ ШАРИКОВЫЙ РАДИАЛЬНЫЙ RCJTY50-N
Manufacturer: INA-FAG
SEALS (REINFORCED SEAL) (AS)
Manufacturer: FEKO
Sizes: 25x41.25x7 (mm)
AT20 DD
Manufacturer: ContiTech AG
K81 TPE(245x260x2,05)
Manufacturer: KASTAS
Sizes: 245x260x2,05 (mm)
K755 PTFE/NBR(327,5x297,5x15 )
Manufacturer: KASTAS
Sizes: 327,5x297,5x15 (mm)
ПОДШИПНИК ШАРИКОВЫЙ ЗАКРЕПЛЯЕМЫЙ GLE70-KRR-B
Manufacturer: INA-FAG
Sizes: 70x125x68.2 (mm)
Bearing NUP314
Manufacturer: ETERNO
Sizes: 70x150x35 (mm)
Weight:: 2.95 (kg)
INSTALLING BEARINGS
Approximately 16% of all early pill accidents are caused by faulty mounting (generally excessive force) and lack of proper tools.
DROPPING BEARINGS
The need for dismantling (removal) of the bearing can be caused by several reasons: failure of the bearings, disassembly of other parts of the mechanism, and so on.
SELECTION OF FUEL OILS
The use of grease to lubricate the bearings ensures smooth operation and maximum reliability of bearings, even in extreme conditions.
