ContiTech AGT10/630 DL ( DT10 630 )
Specifications
Identification on the belt : MADE IN GERMANYSYNCHROFLEX T10/630
Trademark : CONTI® SYNCHROFLEX
Manufacturer : CONTITECH (Германия)
Belt dimensions:
| Tooth step | t | inch (1/10) | 60 |
| Tooth step | t | мм | 10 |
| Thickness | hs | мм | 7 |
| Tooth height | ht | мм | 2.5 |
| Nominal length | Lp/Lw | мм | 630 |
| Number of teeth |
63 | ||
| Minimum pulley diameter | dw | мм | 12 |
| Height | h | мм | 10 |
SEALS (REINFORCED SEAL) (AS)
Manufacturer: FEKO
Sizes: 65x100x13 (mm)
ATG10 5320 MFX - Megaflex ( ATK10 5320 BFX - BRECOFLEX )
Manufacturer: ContiTech AG
K69 POM(120x114x14,8 )
Manufacturer: KASTAS
Sizes: 120x114x14,8 (mm)
K501 PA/NBR(85x69,5x6,3)
Manufacturer: KASTAS
Sizes: 85x69,5x6,3 (mm)
Подшипник NJ 312 EG
Manufacturer: NACHI
Sizes: 60x130x31 (mm)
Weight:: 1.87 (kg)
K17 PTFE/NBR(30x22,5x3,2 )
Manufacturer: KASTAS
Sizes: 30x22,5x3,2 (mm)
O-RING
Manufacturer: NQK SF
Sizes: 230.00x240.60x5.30 (mm)
Подшипник 7208BEA
Manufacturer: NSK-RHP
Sizes: 40x80x18 (mm)
Bearings NCS1512
Manufacturer: INA-FAG
Sizes: 23.813x36.513x19.5 (mm)
Weight:: 0.063 (kg)
O-RING
Manufacturer: NQK SF
Sizes: 487.00x501.00x7.00 (mm)
INSTALLING BEARINGS
Approximately 16% of all early pill accidents are caused by faulty mounting (generally excessive force) and lack of proper tools.
DROPPING BEARINGS
The need for dismantling (removal) of the bearing can be caused by several reasons: failure of the bearings, disassembly of other parts of the mechanism, and so on.
SELECTION OF FUEL OILS
The use of grease to lubricate the bearings ensures smooth operation and maximum reliability of bearings, even in extreme conditions.
