ContiTech AGT10/530 DL ( DT10 530 )
Specifications
Identification on the belt : MADE IN GERMANYSYNCHROFLEX T10/530
Trademark : CONTI® SYNCHROFLEX
Manufacturer : CONTITECH (Германия)
Belt dimensions:
| Tooth step | t | inch (1/10) | 60 |
| Tooth step | t | мм | 10 |
| Thickness | hs | мм | 7 |
| Tooth height | ht | мм | 2.5 |
| Nominal length | Lp/Lw | мм | 530 |
| Number of teeth |
53 | ||
| Minimum pulley diameter | dw | мм | 12 |
| Height | h | мм | 10 |
ПОДШИПНИК ШАРИКОВЫЙ РАДИАЛЬНЫЙ 618/530-M
Manufacturer: FAG
Sizes: 530x650x56 (mm)
SEALS (REINFORCED SEAL) (FL)
Manufacturer: FEKO
Sizes: 66.67x95.30x15.87 (mm)
ПОДШИПНИК ШАРИКОВЫЙ РАДИАЛЬНО-СФЕРИЧЕСКИЙ 2213-K-TVH-C3
Manufacturer: FAG
Sizes: 65x120x31 (mm)
K21 NBR(32x40x5)
Manufacturer: KASTAS
Sizes: 32x40x5 (mm)
Bearing DAC28580042
Manufacturer:
Sizes: 28x58x42/42 (mm)
17x1829 B 72
Manufacturer: ContiTech AG
HTD 920 8M
Manufacturer: ContiTech AG
STUFFING BOX (REINFORCED CUFFS) NON-STANDARD (TC)
Manufacturer: STO
Sizes: 40x80x8 (mm)
STUFFING BOX (REINFORCED CUFFS) NON-STANDARD (TC4)
Manufacturer: STO
Sizes: 27x37x10.5 (mm)
STUFFING BOX (REINFORCED CUFFS) NON-STANDARD (SB)
Manufacturer: STO
Sizes: 12x20x5 (mm)
INSTALLING BEARINGS
Approximately 16% of all early pill accidents are caused by faulty mounting (generally excessive force) and lack of proper tools.
DROPPING BEARINGS
The need for dismantling (removal) of the bearing can be caused by several reasons: failure of the bearings, disassembly of other parts of the mechanism, and so on.
SELECTION OF FUEL OILS
The use of grease to lubricate the bearings ensures smooth operation and maximum reliability of bearings, even in extreme conditions.
