ContiTech AGT2,5/457,5 DL ( DT2,5 457,5 )
Specifications
Identification on the belt : MADE IN GERMANYSYNCHROFLEX T2,5/457,5
Trademark : CONTI® SYNCHROFLEX
Manufacturer : CONTITECH (Германия)
Belt dimensions:
Tooth step | t | inch (1/10) | 80 |
Thickness | hs | мм | 2 |
Tooth height | ht | мм | 0.7 |
Nominal length | Lp/Lw | дюйм (1/10) | 2.5 |
Nominal length | Lp/Lw | мм | 457.5 |
Number of teeth |
183 | ||
Minimum pulley diameter | dw | мм | 10 |
Height | h | мм | 10 |
O-RING
Manufacturer: NQK SF
Sizes: 61.00x77.00x8.00 (mm)

T10 DD 1610 MEGADYNE MEGAPOWER
Manufacturer: ContiTech AG

Bearing IR14x17x17
Manufacturer: INA-FAG
Sizes: 14x17x17 (mm)
Weight:: 0.01 (kg)

Bearings NNTR50X130X65 2ZL
Manufacturer: INA-FAG
Sizes: 50x130x65 (mm)
Weight:: 5.2 (kg)

ПОДШИПНИК РОЛИКОВЫЙ КОНИЧЕСКИЙ 31320-X
Manufacturer: FAG
Sizes: 100x215x56.5 (mm)

MEGADYNE ISORAN 330 RPP3 ( RPP 3M 330 )
Manufacturer: ContiTech AG

CONTI-V D132 32X3350 Li/3426 Ld L=L EL
Manufacturer: ContiTech AG

AT5 2000 ( АТ5 2000 ) MEGADYNE MEGAPOWER
Manufacturer: ContiTech AG

Подшипник 2311
Manufacturer: NACHI
Sizes: 55x120x43 (mm)
Weight:: 0.73 (kg)

SEALS (REINFORCED SEAL) (AYS)
Manufacturer: FEKO
Sizes: 25x47x8 (mm)


INSTALLING BEARINGS
Approximately 16% of all early pill accidents are caused by faulty mounting (generally excessive force) and lack of proper tools.

DROPPING BEARINGS
The need for dismantling (removal) of the bearing can be caused by several reasons: failure of the bearings, disassembly of other parts of the mechanism, and so on.

SELECTION OF FUEL OILS
The use of grease to lubricate the bearings ensures smooth operation and maximum reliability of bearings, even in extreme conditions.