ContiTech AGAT5/1230 ( АТ5 1230 )
Specifications
Identification on the belt : MADE IN GERMANYSYNCHROFLEX AT5/1230
Trademark : CONTI®SYNCHROFLEX
Manufacturer : ContiTechAG (Германия)
Belt dimensions:
| Tooth step | t | мм | 5 |
| Thickness | hs | мм | 2.7 |
| Tooth height | ht | мм | 1.2 |
| Nominal length | Lp/Lw | мм | 1230 |
| Number of teeth |
246 | ||
| Width | bo | мм | 10 |
| Step | АТ5 |
ПОДШИПНИК ШАРИКОВЫЙ РАДИАЛЬНО-УПОРНЫЙ HCS7000-C-T-P4S
Manufacturer: FAG
Sizes: 10x26x8 (mm)
Weight:: 0.02 (kg)
ПОДШИПНИК ШПИНДЕЛЬНЫЙ HCS71905-C-T-P4S
Manufacturer: FAG
Sizes: 25x42x9 (mm)
D 135 32x3430 Li / 3506 Ld
Manufacturer: ContiTech AG
ПОДШИПНИК РОЛИКОВЫЙ ОДНОРЯДНЫЙ СФЕРИЧЕСКИЙ 20211-TVP
Manufacturer: FAG
Sizes: 55x100x21 (mm)
K75 PHENOLIC(63x68x9,7)
Manufacturer: KASTAS
Sizes: 63x68x9,7 (mm)
Корпус MUP004
Manufacturer: NACHI
Weight:: 230 (kg)
AT10 1500 ( АТ10 1500 ) MEGADYNE MEGAPOWER
Manufacturer: ContiTech AG
K17 PTFE/NBR(125x104x8,1)
Manufacturer: KASTAS
Sizes: 125x104x8,1 (mm)
ПОДШИПНИК РОЛИКОВЫЙ САМОУСТАНАВЛИВАЮЩИЙСЯ 22208-E1-K
Manufacturer: FAG
Sizes: 40x80x23 (mm)
CC213 ( СС 213 ) Le= 5511 мм
Manufacturer: ContiTech AG
INSTALLING BEARINGS
Approximately 16% of all early pill accidents are caused by faulty mounting (generally excessive force) and lack of proper tools.
DROPPING BEARINGS
The need for dismantling (removal) of the bearing can be caused by several reasons: failure of the bearings, disassembly of other parts of the mechanism, and so on.
SELECTION OF FUEL OILS
The use of grease to lubricate the bearings ensures smooth operation and maximum reliability of bearings, even in extreme conditions.
