ContiTech AGAT3 1011 F E3/8
Specifications
Identification on the belt : Made in Germany CONTITECH DO NOT CRIMP AT3 1011 F E3/8
Trademark : CONTI®SYNCHROFLEX
Manufacturer : ContiTechAG (Германия)
Belt dimensions:
| Tooth step | t | мм | 3 |
| Thickness | hs | мм | 1.9 |
| Tooth height | ht | мм | 1.1 |
| Nominal length | Lp/Lw | мм | 1011 |
| Number of teeth |
337 | ||
| Minimum pulley diameter | dw | мм | 80 |
| Step | АТ20 |
ПОДШИПНИК ШАРИКОВЫЙ РАДИАЛЬНО-УПОРНЫЙ HCS7004-C-T-P4S
Manufacturer: FAG
Sizes: 20x42x12 (mm)
Weight:: 0.074 (kg)
Z 40,5 10x1030 Li / 1053 Ld
Manufacturer: ContiTech AG
Корпус UCFC218
Manufacturer: NACHI
Weight:: 12.7 (kg)
SALNIK REINFORCED (TC)
Manufacturer: NQK SF
Sizes: 47.6x79.5x12/7 (mm)
5.7 NBR 70(079,20x05,70)
Manufacturer: KASTAS
SEALS (REINFORCED SEAL) (AS)
Manufacturer: FEKO
Sizes: 170x200x10 (mm)
Bearing 624 ZZ
Manufacturer: ETERNO
Sizes: 4x13x5 (mm)
Weight:: 0.039 (kg)
Подшипник NU 2222
Manufacturer: NACHI
Sizes: 110x200x53 (mm)
Weight:: 6.93 (kg)
K17 PTFE/NBR(30x22,5x3,2 )
Manufacturer: KASTAS
Sizes: 30x22,5x3,2 (mm)
ПОДШИПНИК ШАРИКОВЫЙ РАДИАЛЬНО-СФЕРИЧЕСКИЙ 2211-K-TVH-C3
Manufacturer: FAG
Sizes: 55x100x25 (mm)
INSTALLING BEARINGS
Approximately 16% of all early pill accidents are caused by faulty mounting (generally excessive force) and lack of proper tools.
DROPPING BEARINGS
The need for dismantling (removal) of the bearing can be caused by several reasons: failure of the bearings, disassembly of other parts of the mechanism, and so on.
SELECTION OF FUEL OILS
The use of grease to lubricate the bearings ensures smooth operation and maximum reliability of bearings, even in extreme conditions.
