ContiTech AGCTD 1568 C14M CARBON
Specifications
Identification on the belt : Made in Germany CONTITECH DO NOT CRIMP CTD 1568 C14M CARBON
Trademark : CONTI®SYNCHROCHAIN CARBON
Manufacturer : ContiTech AG (Германия)
Belt dimensions:
| Tooth step | t | мм | 14 |
| Thickness | hs | мм | 10 |
| Tooth height | ht | мм | 6.1 |
| Nominal length | Lp/Lw | мм | 1568 |
| Number of teeth |
112 | ||
| Minimum pulley diameter | dw | мм | 124.78 |
K06 NBR(140x150x7/5)
Manufacturer: KASTAS
Sizes: 140x150x7/5 (mm)
160XL
Manufacturer: ContiTech AG
ПОДШИПНИК РОЛИКОВЫЙ КОНИЧЕСКИЙ 32038-X-N11CA-A350-400
Manufacturer: FAG
Sizes: 190x290x128 (mm)
Подшипник 7304 B
Manufacturer: NSK-RHP
Sizes: 20x52x15 (mm)
Weight:: 0.15 (kg)
ПОДШИПНИК ШАРИКОВЫЙ УПОРНО-РАДИАЛЬНЫЙ ZKLF1762-2RS-2AP
Manufacturer: INA-FAG
Sizes: 17x62x50 (mm)
Weight:: 3.9 (kg)
SALNIK REINFORCED (TC)
Manufacturer: NQK SF
Sizes: 125x170x22 (mm)
O-RING
Manufacturer: NQK SF
Sizes: 13.80x20.00x3.10 (mm)
SEALS (REINFORCED SEAL) (FS)
Manufacturer: FEKO
Sizes: 120x160.10x12 (mm)
SEALS (REINFORCED SEAL) (AS)
Manufacturer: FEKO
Sizes: 25x47x8 (mm)
Подшипник O-22
Manufacturer: NACHI
Sizes: 102.394x69.85x25.4 (mm)
Weight:: 3.9 (kg)
INSTALLING BEARINGS
Approximately 16% of all early pill accidents are caused by faulty mounting (generally excessive force) and lack of proper tools.
DROPPING BEARINGS
The need for dismantling (removal) of the bearing can be caused by several reasons: failure of the bearings, disassembly of other parts of the mechanism, and so on.
SELECTION OF FUEL OILS
The use of grease to lubricate the bearings ensures smooth operation and maximum reliability of bearings, even in extreme conditions.
