ContiTech AGCTD 1260 C14M CARBON
Specifications
Identification on the belt : Made in Germany CONTITECH DO NOT CRIMP CTD 1260 C14M CARBON
Trademark : CONTI®SYNCHROCHAIN CARBON
Manufacturer : ContiTech AG (Германия)
Belt dimensions:
| Tooth step | t | мм | 14 |
| Thickness | hs | мм | 10 |
| Tooth height | ht | мм | 6.1 |
| Nominal length | Lp/Lw | мм | 1260 |
| Number of teeth |
90 | ||
| Minimum pulley diameter | dw | мм | 124.78 |
K21 NBR(20x30x10)
Manufacturer: KASTAS
Sizes: 20x30x10 (mm)
HTD 8M 5864 ( HTD8M 5864 -V, -M, -MFX )
Manufacturer: ContiTech AG
SALNIK REINFORCED (TC)
Manufacturer: NQK SF
Sizes: 28x36x7 (mm)
SALNIK REINFORCED (TC)
Manufacturer: NQK SF
Sizes: 60x86x10 (mm)
Krestovina 40X115,6
Manufacturer: TOYO
AT10 DD
Manufacturer: ContiTech AG
CC149 ( СС 149 ) Le= 3886 мм
Manufacturer: ContiTech AG
O-RING
Manufacturer: NQK SF
Sizes: 103.00x115.00x6.00 (mm)
BB85 ( ВВ 85 ) Le= 2228 мм
Manufacturer: ContiTech AG
ContiTech HTD14M100 XHP-PAZ
Manufacturer: ContiTech AG
INSTALLING BEARINGS
Approximately 16% of all early pill accidents are caused by faulty mounting (generally excessive force) and lack of proper tools.
DROPPING BEARINGS
The need for dismantling (removal) of the bearing can be caused by several reasons: failure of the bearings, disassembly of other parts of the mechanism, and so on.
SELECTION OF FUEL OILS
The use of grease to lubricate the bearings ensures smooth operation and maximum reliability of bearings, even in extreme conditions.
