ContiTech AGCTD 4480 C8M CARBON
Specifications
Identification on the belt : Made in Germany CONTITECH DO NOT CRIMP CTD 4480 C8M CARBON
Trademark : CONTI®SYNCHROCHAIN CARBON
Manufacturer :
Belt dimensions:
Tooth step | t | мм | 8 |
Thickness | hs | мм | 5.6 |
Tooth height | ht | мм | 3.4 |
Nominal length | Lp/Lw | мм | 4480 |
Number of teeth |
560 | ||
Minimum pulley diameter | dw | мм | 56.02 |
T10 DD
Manufacturer: ContiTech AG
5.7 NBR 90(134,20x05,70)
Manufacturer: KASTAS
O-RING
Manufacturer: NQK SF
Sizes: 97.20x108.60x5.70 (mm)
K81 TPE(72,5x80x3)
Manufacturer: KASTAS
Sizes: 72,5x80x3 (mm)
HTD 8M 4400 ( HTD8M 4400 -V, -M, -MFX )
Manufacturer: ContiTech AG
O-RING
Manufacturer: NQK SF
Sizes: 211.02x225.00x6.99 (mm)
Подшипник 7219 C
Manufacturer: NSK-RHP
Sizes: 95x170x32 (mm)
Weight:: 3.05 (kg)
Mechanical seal RM 551С
Manufacturer: RiMi
SEALS (REINFORCED SEAL) (A)
Manufacturer: FEKO
Sizes: 53.97x85.95x12.70 (mm)
SEALS (REINFORCED SEAL) (FS)
Manufacturer: FEKO
Sizes: 121.50x152.50x22 (mm)
INSTALLING BEARINGS
Approximately 16% of all early pill accidents are caused by faulty mounting (generally excessive force) and lack of proper tools.
DROPPING BEARINGS
The need for dismantling (removal) of the bearing can be caused by several reasons: failure of the bearings, disassembly of other parts of the mechanism, and so on.
SELECTION OF FUEL OILS
The use of grease to lubricate the bearings ensures smooth operation and maximum reliability of bearings, even in extreme conditions.