ContiTech AGCTD 1760 C8M CARBON
Specifications
Identification on the belt : Made in Germany CONTITECH DO NOT CRIMP CTD 1760 C8M CARBON
Trademark : CONTI®SYNCHROCHAIN CARBON
Manufacturer : ContiTech AG (Германия)
Belt dimensions:
| Tooth step | t | мм | 8 |
| Thickness | hs | мм | 5.6 |
| Tooth height | ht | мм | 3.4 |
| Nominal length | Lp/Lw | мм | 1760 |
| Number of teeth |
220 | ||
| Minimum pulley diameter | dw | мм | 56.02 |
AT10 DD
Manufacturer: ContiTech AG
T5/780 ( Т5 780 )
Manufacturer: ContiTech AG
SEALS (REINFORCED SEAL) (ARS)
Manufacturer: FEKO
Sizes: 100x120x15 (mm)
2.62 NBR 70(71,12x2,62)
Manufacturer: KASTAS
4 NBR 70(122,00x04,00)
Manufacturer: KASTAS
C 136 22x3455 Li / 3514 Ld
Manufacturer: ContiTech AG
Подшипник SL 18 4988
Manufacturer: INA-FAG
Sizes: 440x600x160 (mm)
Weight:: 138.0 (kg)
Bearing LR200KDD
Manufacturer: INA-FAG
Sizes: 10x32x9 (mm)
Weight:: 9 (kg)
2 NBR 70(065,00x02,00)
Manufacturer: KASTAS
4L 320
Manufacturer: ContiTech AG
INSTALLING BEARINGS
Approximately 16% of all early pill accidents are caused by faulty mounting (generally excessive force) and lack of proper tools.
DROPPING BEARINGS
The need for dismantling (removal) of the bearing can be caused by several reasons: failure of the bearings, disassembly of other parts of the mechanism, and so on.
SELECTION OF FUEL OILS
The use of grease to lubricate the bearings ensures smooth operation and maximum reliability of bearings, even in extreme conditions.
