ContiTech AGCTD 1200 C8M CARBON
Specifications
Identification on the belt : Made in Germany CONTITECH DO NOT CRIMP CTD 1200 C8M CARBON
Trademark : CONTI®SYNCHROCHAIN CARBON
Manufacturer : ContiTech AG (Германия)
Belt dimensions:
| Tooth step | t | мм | 8 |
| Thickness | hs | мм | 5.6 |
| Tooth height | ht | мм | 3.4 |
| Nominal length | Lp/Lw | мм | 1200 |
| Number of teeth |
150 | ||
| Minimum pulley diameter | dw | мм | 56.02 |
2.5 NBR 90(015,00x02,50 )
Manufacturer: KASTAS
XPA 590 Lw / Ld ( ХРА 590 )
Manufacturer: ContiTech AG
Торцевое уплотнение RM MG12-53
Manufacturer: RiMi
K21 NBR(20x28x4)
Manufacturer: KASTAS
Sizes: 20x28x4 (mm)
SALNIK REINFORCED (TC)
Manufacturer: NQK SF
Sizes: 30x41x10/5 (mm)
STD 992 S8M CXA
Manufacturer: ContiTech AG
K01 (140x155x34)
Manufacturer: KASTAS
Sizes: 140x155x34 (mm)
K703 PTFE/NBR(540x564x14 )
Manufacturer: KASTAS
Sizes: 540x564x14 (mm)
Krestovina 20x58
Manufacturer: TOYO
Корпус UCCX05
Manufacturer: NACHI
Weight:: 1.0 (kg)
INSTALLING BEARINGS
Approximately 16% of all early pill accidents are caused by faulty mounting (generally excessive force) and lack of proper tools.
DROPPING BEARINGS
The need for dismantling (removal) of the bearing can be caused by several reasons: failure of the bearings, disassembly of other parts of the mechanism, and so on.
SELECTION OF FUEL OILS
The use of grease to lubricate the bearings ensures smooth operation and maximum reliability of bearings, even in extreme conditions.
