ContiTech AGCTD 1120 C8M CARBON
Specifications
Identification on the belt : Made in Germany CONTITECH DO NOT CRIMP CTD 1120 C8M CARBON
Trademark : CONTI®SYNCHROCHAIN CARBON
Manufacturer : ContiTech AG (Германия)
Belt dimensions:
| Tooth step | t | мм | 8 |
| Thickness | hs | мм | 5.6 |
| Tooth height | ht | мм | 3.4 |
| Nominal length | Lp/Lw | мм | 1120 |
| Number of teeth |
140 | ||
| Minimum pulley diameter | dw | мм | 56.02 |
SEALS (REINFORCED SEAL) (FH)
Manufacturer: FEKO
Sizes: 12x37x12.10/14,35 (mm)
4 NBR 70(016,00x04,00)
Manufacturer: KASTAS
Подшипник 6003ZENR
Manufacturer: NACHI
Sizes: 17x35x10 (mm)
Weight:: 0.041 (kg)
K10 NBR(205x220x9,5/13)
Manufacturer: KASTAS
Sizes: 205x220x9,5/13 (mm)
ПОДШИПНИК РОЛИКОВЫЙ ИГОЛЬЧАТЫЙ NAO15X32X12-IS1
Manufacturer: INA-FAG
Sizes: 15x32x12 (mm)
AT5/390 ( АТ5 390 )
Manufacturer: ContiTech AG
Подшипник 29586/29520
Manufacturer: NSK-RHP
Sizes: 63.5x107.95x25.4 (mm)
Weight:: 0.942 (kg)
ПОДШИПНИК РОЛИКОВЫЙ ОДНОРЯДНЫЙ СФЕРИЧЕСКИЙ 20230-MB
Manufacturer: FAG
Sizes: 150x270x45 (mm)
SEALS (REINFORCED SEAL) (FS)
Manufacturer: FEKO
Sizes: 42x58x8 (mm)
Подшипник RNA4904
Manufacturer: NSK-RHP
Sizes: 25x37x17 (mm)
Weight:: 0.055 (kg)
INSTALLING BEARINGS
Approximately 16% of all early pill accidents are caused by faulty mounting (generally excessive force) and lack of proper tools.
DROPPING BEARINGS
The need for dismantling (removal) of the bearing can be caused by several reasons: failure of the bearings, disassembly of other parts of the mechanism, and so on.
SELECTION OF FUEL OILS
The use of grease to lubricate the bearings ensures smooth operation and maximum reliability of bearings, even in extreme conditions.
