ContiTech AGCTD 896 C8M CARBON
Specifications
Identification on the belt : Made in Germany CONTITECH DO NOT CRIMP CTD 896 C8M CARBON
Trademark : CONTI®SYNCHROCHAIN CARBON
Manufacturer : ContiTech AG (Германия)
Belt dimensions:
| Tooth step | t | мм | 8 |
| Thickness | hs | мм | 5.6 |
| Tooth height | ht | мм | 3.4 |
| Nominal length | Lp/Lw | мм | 896 |
| Number of teeth |
112 | ||
| Minimum pulley diameter | dw | мм | 56.02 |
ContiTech HTD 5M 5 HP
Manufacturer: ContiTech AG
SEALS (REINFORCED SEAL) (FRS)
Manufacturer: FEKO
Sizes: 105x130x15 (mm)
Bearing FC67222.1
Manufacturer: INA-FAG
Sizes: 64.516x84.328x4.030 (mm)
Weight:: 0.055 (kg)
Bearing 618/9-ZZP6 (E1080089)
Manufacturer: TMB
Sizes: 9x17x4 (mm)
Weight:: 0.003 (kg)
25X 2240 L=L
Manufacturer: ContiTech AG
T5 DD
Manufacturer: ContiTech AG
STD 1912 S8M CXA
Manufacturer: ContiTech AG
CX 62 CX 1640 Ld
Manufacturer: ContiTech AG
T10 DD
Manufacturer: ContiTech AG
AT20 DD
Manufacturer: ContiTech AG
INSTALLING BEARINGS
Approximately 16% of all early pill accidents are caused by faulty mounting (generally excessive force) and lack of proper tools.
DROPPING BEARINGS
The need for dismantling (removal) of the bearing can be caused by several reasons: failure of the bearings, disassembly of other parts of the mechanism, and so on.
SELECTION OF FUEL OILS
The use of grease to lubricate the bearings ensures smooth operation and maximum reliability of bearings, even in extreme conditions.
