ContiTech AGCTD 994 C14M
Specifications
Identification on the belt : Made in Germany CONTITECH DO NOT CRIMP CTD 994 C14M
Trademark : CONTI®SYNCHROCHAIN
Manufacturer : ContiTech AG (Германия)
Belt dimensions:
Tooth step | t | мм | 14 |
Thickness | hs | мм | 10 |
Tooth height | ht | мм | 6.1 |
Nominal length | Lp/Lw | мм | 994 |
Number of teeth |
71 | ||
Minimum pulley diameter | dw | мм | 124.78 |
ContiTechHTD 5M 25 HP
Manufacturer: ContiTech AG
4 NBR 70(066,00x04,00)
Manufacturer: KASTAS
SALNIK REINFORCED (TC)
Manufacturer: NQK SF
Sizes: 26x50x8 (mm)
AT10 DD
Manufacturer: ContiTech AG
K73 POLYESTER/PTFE(220x225x20)
Manufacturer: KASTAS
Sizes: 220x225x20 (mm)
V 350/5 FK
Manufacturer: ContiTech AG
STUFFING BOX (REINFORCED CUFFS) NON-STANDARD (DC)
Manufacturer: STO
Sizes: 28x47x8 (mm)
Manufacturer: ContiTech AG
SALNIK REINFORCED (TC)
Manufacturer: NQK SF
Sizes: 40x64x10 (mm)
SEALS (REINFORCED SEAL) (A)
Manufacturer: FEKO
Sizes: 315x364x20 (mm)
INSTALLING BEARINGS
Approximately 16% of all early pill accidents are caused by faulty mounting (generally excessive force) and lack of proper tools.
DROPPING BEARINGS
The need for dismantling (removal) of the bearing can be caused by several reasons: failure of the bearings, disassembly of other parts of the mechanism, and so on.
SELECTION OF FUEL OILS
The use of grease to lubricate the bearings ensures smooth operation and maximum reliability of bearings, even in extreme conditions.