ContiTech AGCTD 4400 C8M
Specifications
Identification on the belt : Made in Germany CONTITECH DO NOT CRIMP CTD 4400 C8M
Trademark : CONTI®SYNCHROCHAIN
Manufacturer : ContiTech AG (Германия)
Belt dimensions:
| Tooth step | t | мм | 8 |
| Thickness | hs | мм | 5.6 |
| Tooth height | ht | мм | 3.4 |
| Nominal length | Lp/Lw | мм | 4400 |
| Number of teeth |
550 | ||
| Minimum pulley diameter | dw | мм | 56.02 |
| Width | bo | мм | 105 |
HTD 186 3M CXP
Manufacturer: ContiTech AG
T5 DD
Manufacturer: ContiTech AG
HTD 1160 8M CXP
Manufacturer: ContiTech AG
T10 DD 1210 MEGADYNE MEGAPOWER
Manufacturer: ContiTech AG
SALNIK REINFORCED (TC)
Manufacturer: NQK SF
Sizes: 36x46x6 (mm)
SEALS (REINFORCED SEAL) (A-B)
Manufacturer: FEKO
Sizes: 16x32x5 (mm)
SALNIK REINFORCED (TC)
Manufacturer: NQK SF
Sizes: 63x93x12 (mm)
K54 NBR(25x18x2,5)
Manufacturer: KASTAS
Sizes: 25x18x2,5 (mm)
O-RING
Manufacturer: NQK SF
Sizes: 46.00x50.00x2.00 (mm)
STD 1552 S8M
Manufacturer: ContiTech AG
INSTALLING BEARINGS
Approximately 16% of all early pill accidents are caused by faulty mounting (generally excessive force) and lack of proper tools.
DROPPING BEARINGS
The need for dismantling (removal) of the bearing can be caused by several reasons: failure of the bearings, disassembly of other parts of the mechanism, and so on.
SELECTION OF FUEL OILS
The use of grease to lubricate the bearings ensures smooth operation and maximum reliability of bearings, even in extreme conditions.
