ContiTech AGCTD 3048 C8M
Specifications
Identification on the belt : Made in Germany CONTITECH DO NOT CRIMP CTD 3048 C8M
Trademark : CONTI®SYNCHROCHAIN
Manufacturer : ContiTech AG (Германия)
Belt dimensions:
| Tooth step | t | мм | 8 |
| Thickness | hs | мм | 5.6 |
| Tooth height | ht | мм | 3.4 |
| Nominal length | Lp/Lw | мм | 3048 |
| Number of teeth |
381 | ||
| Minimum pulley diameter | dw | мм | 56.02 |
| Width | bo | мм | 105 |
Торцевое уплотнение RM MG1-42
Manufacturer: RiMi
2 NBR 70(044,00x02,00)
Manufacturer: KASTAS
SPA 2082
Manufacturer: ContiTech AG
AT5/480 ( АТ5 480 )
Manufacturer: ContiTech AG
SALNIK REINFORCED (TC)
Manufacturer: NQK SF
Sizes: 20x41x7 (mm)
Bearing NF424
Manufacturer: ETERNO
Sizes: 120x310x72 (mm)
Weight:: 30.16 (kg)
Bearing 30313 (2GB)
Manufacturer: GMB
Sizes: 65x140x33 (mm)
Weight:: 2.44 (kg)
10X1700 Z 67
Manufacturer: ContiTech AG
RPP14 DD 5610 MFX - Megaflex
Manufacturer: ContiTech AG
K69 POM(34x28x9,5)
Manufacturer: KASTAS
Sizes: 34x28x9,5 (mm)
INSTALLING BEARINGS
Approximately 16% of all early pill accidents are caused by faulty mounting (generally excessive force) and lack of proper tools.
DROPPING BEARINGS
The need for dismantling (removal) of the bearing can be caused by several reasons: failure of the bearings, disassembly of other parts of the mechanism, and so on.
SELECTION OF FUEL OILS
The use of grease to lubricate the bearings ensures smooth operation and maximum reliability of bearings, even in extreme conditions.
