ContiTech AGCTD 1600 C8M
Specifications
Identification on the belt : Made in Germany CONTITECH DO NOT CRIMP CTD 1600 C8M
Trademark : CONTI®SYNCHROCHAIN
Manufacturer : ContiTech AG (Германия)
Belt dimensions:
| Tooth step | t | мм | 8 |
| Thickness | hs | мм | 5.6 |
| Tooth height | ht | мм | 3.4 |
| Nominal length | Lp/Lw | мм | 1600 |
| Number of teeth |
200 | ||
| Minimum pulley diameter | dw | мм | 56.02 |
| Width | bo | мм | 105 |
Mechanical seal RM 301-10
Manufacturer: RiMi
Bearing 7007ACP6 (E46107)
Manufacturer: TMB
Sizes: 35x62x14 (mm)
Weight:: 0.15 (kg)
SEALS (REINFORCED SEAL) (O)
Manufacturer: FEKO
Sizes: 78x100x14.50 (mm)
Bearing NUP315EM (92315EH)
Manufacturer: TMB
Sizes: 75x160x37 (mm)
Weight:: 3.45 (kg)
SEALS (REINFORCED SEAL) (FRS)
Manufacturer: FEKO
Sizes: 17x28x7.30 (mm)
Подшипник 6918N
Manufacturer: NACHI
Sizes: 90x125x18 (mm)
Weight:: 0.549 (kg)
STUFFING BOX (REINFORCED CUFFS) NON-STANDARD (SB)
Manufacturer: STO
Sizes: 325x365x20 (mm)
Подшипник 7201
Manufacturer: NACHI
Sizes: 12x32x10 (mm)
Weight:: 0.04 (kg)
Подшипник 51322
Manufacturer: NACHI
Sizes: 110x190x63 (mm)
Weight:: 225 (kg)
Подшипник 6217-2NK
Manufacturer: NACHI
Sizes: 85x150x28 (mm)
Weight:: 1.79 (kg)
INSTALLING BEARINGS
Approximately 16% of all early pill accidents are caused by faulty mounting (generally excessive force) and lack of proper tools.
DROPPING BEARINGS
The need for dismantling (removal) of the bearing can be caused by several reasons: failure of the bearings, disassembly of other parts of the mechanism, and so on.
SELECTION OF FUEL OILS
The use of grease to lubricate the bearings ensures smooth operation and maximum reliability of bearings, even in extreme conditions.
