ContiTech AGB-1960
Specifications
Identification on the belt : Made in Germany CONTITECH DO NOT CRIMP B-1960
Trademark : CONTI® SILENTSYNC
Manufacturer : CONTITECH, страна происхождения США
Belt dimensions:
| Tooth step | t | мм | 14 |
| Thickness | hs | мм | 8.6 |
| Tooth height | ht | мм | 5.33 |
| Nominal length | Lp/Lw | мм | 1960 |
| Number of teeth |
140 | ||
| Minimum pulley diameter | dw | мм | 107 |
| Width | bo | мм | 35 |
B 73 17x1855 Li / 1900 Ld
Manufacturer: ContiTech AG
HTD 920 8M CXA
Manufacturer: ContiTech AG
K73 POLYESTER/PTFE(250x255x15)
Manufacturer: KASTAS
Sizes: 250x255x15 (mm)
RPP14 7588 ( RPP 14 7588 -V, -M, -MFX )
Manufacturer: ContiTech AG
Подшипник NNCL 4992
Manufacturer: SKF
Sizes: 460x620x160 (mm)
Weight:: 142.0 (kg)
Krestovina 44x149
Manufacturer: TOYO
Подшипник 22218EAKE4
Manufacturer: NSK-RHP
Sizes: 90x160x40 (mm)
Weight:: 3.3 (kg)
Подшипник 2204
Manufacturer: NSK-RHP
Sizes: 20x47x18 (mm)
ПОДШИПНИК РОЛИКОВЫЙ ИГОЛЬЧАТЫЙ С ОДНИМ НАРУЖНЫМ ШТАМПОВАННЫМ КОЛЬЦОМ, ЗАКРЫТЫМ С ОДНОЙ СТОРОНЫ BK4020
Manufacturer: INA-FAG
Sizes: 40x47x20 (mm)
SEALS (REINFORCED SEAL) (AS)
Manufacturer: FEKO
Sizes: 180x210x16 (mm)
INSTALLING BEARINGS
Approximately 16% of all early pill accidents are caused by faulty mounting (generally excessive force) and lack of proper tools.
DROPPING BEARINGS
The need for dismantling (removal) of the bearing can be caused by several reasons: failure of the bearings, disassembly of other parts of the mechanism, and so on.
SELECTION OF FUEL OILS
The use of grease to lubricate the bearings ensures smooth operation and maximum reliability of bearings, even in extreme conditions.
