ContiTech AGW-1600
Specifications
Identification on the belt : Made in Germany CONTITECH DO NOT CRIMP 1600
Trademark : CONTI® SYNCHROTWIN CXP
Manufacturer : CONTITECH, страна происхождения США
Belt dimensions:
Tooth step | t | мм | 8 |
Thickness | hs | мм | 5.3 |
Tooth height | ht | мм | 3.05 |
Nominal length | Lp/Lw | мм | 1600 |
Number of teeth |
200 | ||
Minimum pulley diameter | dw | мм | 45.9 |
Width | bo | мм | 32 |
SEALS (REINFORCED SEAL) (AS)
Manufacturer: FEKO
Sizes: 100x118x10 (mm)
K23 NBR(19,05x12,7x3,17)
Manufacturer: KASTAS
Sizes: 19,05x12,7x3,17 (mm)
5 NBR 70(075,00x05,00)
Manufacturer: KASTAS
5 NBR 70(035,00x05,00)
Manufacturer: KASTAS
B 49 17x1245 Li / 1290 Ld
Manufacturer: ContiTech AG
K73 POLYESTER/PTFE(212x220x15)
Manufacturer: KASTAS
Sizes: 212x220x15 (mm)
148XL
Manufacturer: ContiTech AG
ПОДШИПНИК ШАРИКОВЫЙ ЗАКРЕПЛЯЕМЫЙ GYE30-KRR-B
Manufacturer: INA-FAG
Sizes: 30x62x38.1 (mm)
XPA 2732 Lw / Ld ( ХРА 2732 )
Manufacturer: ContiTech AG
T20 DD
Manufacturer: ContiTech AG
INSTALLING BEARINGS
Approximately 16% of all early pill accidents are caused by faulty mounting (generally excessive force) and lack of proper tools.
DROPPING BEARINGS
The need for dismantling (removal) of the bearing can be caused by several reasons: failure of the bearings, disassembly of other parts of the mechanism, and so on.
SELECTION OF FUEL OILS
The use of grease to lubricate the bearings ensures smooth operation and maximum reliability of bearings, even in extreme conditions.