ContiTech AGW-896
Specifications
Identification on the belt : Made in Germany CONTITECH DO NOT CRIMP 896
Trademark : CONTI® SYNCHROTWIN CXP
Manufacturer : CONTITECH, страна происхождения США
Belt dimensions:
| Tooth step | t | мм | 8 |
| Thickness | hs | мм | 5.3 |
| Tooth height | ht | мм | 3.05 |
| Nominal length | Lp/Lw | мм | 896 |
| Number of teeth |
112 | ||
| Minimum pulley diameter | dw | мм | 45.9 |
| Width | bo | мм | 32 |
Manufacturer: ContiTech AG
T5 DD
Manufacturer: ContiTech AG
13x2650 A 104
Manufacturer: ContiTech AG
SPA 3250
Manufacturer: ContiTech AG
Mechanical seal RM 301-65
Manufacturer: RiMi
STUFFING BOX (REINFORCED CUFFS) NON-STANDARD (TCY)
Manufacturer: STO
Sizes: 20x35x5.5/10 (mm)
K22 PU(165x180x11)
Manufacturer: KASTAS
Sizes: 165x180x11 (mm)
K06 PU(240x255x10/16)
Manufacturer: KASTAS
Sizes: 240x255x10/16 (mm)
SEALS (REINFORCED SEAL) (SC)
Manufacturer: FEKO
Sizes: 49.90x100/104,50x25.40/4 (mm)
SALNIK REINFORCED (TC)
Manufacturer: NQK SF
Sizes: 50x90x8 (mm)
INSTALLING BEARINGS
Approximately 16% of all early pill accidents are caused by faulty mounting (generally excessive force) and lack of proper tools.
DROPPING BEARINGS
The need for dismantling (removal) of the bearing can be caused by several reasons: failure of the bearings, disassembly of other parts of the mechanism, and so on.
SELECTION OF FUEL OILS
The use of grease to lubricate the bearings ensures smooth operation and maximum reliability of bearings, even in extreme conditions.
