ContiTech AGY-1000
Specifications
Identification on the belt : Made in Germany CONTITECH DO NOT CRIMP Y-1000
Trademark : CONTI® SILENTSYNC
Manufacturer : CONTITECH, страна происхождения США
Belt dimensions:
Tooth step | t | мм | 8 |
Thickness | hs | мм | 5.3 |
Tooth height | ht | мм | 3.05 |
Nominal length | Lp/Lw | мм | 1000 |
Number of teeth |
125 | ||
Minimum pulley diameter | dw | мм | 45.9 |
Width | bo | мм | 16 |
ПОДШИПНИК РОЛИКОВЫЙ КОНИЧЕСКИЙ KHM88649-HM88610
Manufacturer: FAG
Sizes: 34.925x72.233x25.4 (mm)
T10 1780 ( Т10 1780 ) MEGADYNE MEGAPOWER
Manufacturer: ContiTech AG
K35 PTFE/NBR(110x130,5x8,1 )
Manufacturer: KASTAS
Sizes: 110x130,5x8,1 (mm)
B 163 17x4140 Li / 4185 Ld
Manufacturer: ContiTech AG
SALNIK REINFORCED (TC)
Manufacturer: NQK SF
Sizes: 84.1x111.2x12/7 (mm)
RPP8 4128 ( RPP 8 4128 -V, -M, -MFX )
Manufacturer: ContiTech AG
Bearing 628/3-ZZP6 (E2080083)
Manufacturer: TMB
Sizes: 3x7x2.5 (mm)
SEALS (REINFORCED SEAL) (FY)
Manufacturer: FEKO
Sizes: 26x32x3.50 (mm)
K11 TPE(150x165x7,2/12 )
Manufacturer: KASTAS
Sizes: 150x165x7,2/12 (mm)
ПОДШИПНИК ШАРИКОВЫЙ РАДИАЛЬНО-СФЕРИЧЕСКИЙ 1205-K-TVH-C3
Manufacturer: FAG
Sizes: 25x52x15 (mm)
INSTALLING BEARINGS
Approximately 16% of all early pill accidents are caused by faulty mounting (generally excessive force) and lack of proper tools.
DROPPING BEARINGS
The need for dismantling (removal) of the bearing can be caused by several reasons: failure of the bearings, disassembly of other parts of the mechanism, and so on.
SELECTION OF FUEL OILS
The use of grease to lubricate the bearings ensures smooth operation and maximum reliability of bearings, even in extreme conditions.